Miele W 2240 operating instructions Memory Function

Page 62

Programmable functions

Memory Function

If an additional option(s) is selected for a programme, and / or the spin speed is altered, the machine stores these changes in memory at the start of a programme.

When that particular programme is chosen again, the display will show the additional option(s) and / or spin speed which have been stored for that programme in the memory.

The washing machine is delivered with the memory function de-activated.

Follow steps A to G to programme and store in memory.

Before you begin, first ensure that:

–The washing machine is switched off.

–The machine is properly closed.

–The programme selector is at Finish.

APress the Start button and keep it pressed in whilst carrying out steps B to C.

BSwitch the machine on with the I-On/0-Offbutton.

CWait until the Start indicator light comes on . . .

D. . . and then release the Start button.

ETurn the programme selector to the Cottons 30°C position:

A P will flash in the display alternating with the number 0 or 1.

0= Memory function is deactivated

1= Memory function is activated

FPress the Start button to change from

one to the other. The display will change accordingly from 0 to 1 or from 1 to 0.

GSwitch the washing machine off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory and will remain so until you alter it.

62

Image 62

Contents Operating instructions for Washing machine W Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents Contents Technical data Technical safety Correct usageUse Disposal of your old machine Safety with childrenAccessories Delicates and Silks / programmes Description of the machineSpecial programmes Water plus systemFuture updates PC Control panel Programme duration Programme selector Important control panel featuresSpin button with indicator lights Select the spin speed Additional option buttonsBefore using for the first time Energy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentHow to wash correctly Brief instructionsProgramme chart Cottons 30C to 95C 9ö876 Minimum iron 30C to 60CWoollens cold to 40C /ac Delicates cold to 40CSilks 30C /c Starch Quick wash 40CAutomatic 40C Separate rinseIroning Garment care label symbolsTumble dry Before washing ASort the laundrySelecting a programme Pre-wash Additional options HSelect additional optionsIntensive SoakIAdding detergent JPress the Start buttonKOpen the drum door MSwitch off the washing machineAt the end of a programme LRemove the laundryDoor cannot be opened, if Adding or removing laundry after a programme has startedPlease note Altering a programme once selected To cancel or select a different programmeInterrupting a programme Skipping a programme stageProgramme sequence Main wash Rinses SpinningSpecial features in the programme sequences Washing with several components DetergentWater softeners Liquid detergentAdding fabric conditioner separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Adding starch separatelyCloth Cleaning and careExtra cleaning Cleaning the detergent dispenser drawer Clean the siphonCleaning the water inlet filters To clean the filter in the water inlet valveProgramme does not start Problem solving guideProblem Possible cause Remedy Water protection Call the Service Department Wash programme stops and a fault indicator light comes onProblem Possible cause Remedy a System has reacted Flashing Appears in the displayCheck light comes on Indicator light isFlashes General problems or an unsatisfactory wash result Required result Problem Possible cause Remedy Liquid detergentDoes not give Grey, greasyDrum door does not open when you press the Door button Remove the lever Use it to open the access flapProcedure for draining the machine Blocked drain outletOpening the drum door Optional accessories Customer contactInstallation and connection Front viewRear view Removing the transit fittings Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineReplacing the lid Building under a continuous worktop/in a kitchen runWasher and Dryer stack Inlet hose Electronic unit and washing machine housingMiele water protection system Drain hoseExtension hose Maintenance and careConnection to the water supply Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing standard settings Water plus system Settings are as followsProgrammable functions Programmable functions Gentle action Follow steps a to G to programme and store in memoryTop-up rinse for Cottons Memory Function Soak Alteration rights reserved/5104/W