Miele W 2240 At the end of a programme, KOpen the drum door, LRemove the laundry

Page 25

Garment care label symbols

At the end of a programme

When the Anti-crease/Finishindicator light comes on the laundry can be removed from the drum. (This light stays on at the end of the programme and remains on until the selector is turned back to the Finish position).

KOpen the drum door

^Press the Door button.

LRemove the laundry.

,Only remove laundry from the machine once the drum has stopped turning. Reaching into a moving drum is extremely dangerous and could result in injury.

^Check the folds in the door seal for any small articles, e.g. buttons which may be lodged there.

Check that all items have been removed from the drum. Items left in the drum could discolour other items in the next wash or become discoloured themselves.

MSwitch off the washing machine.

^Press and release the I-On/0-Offbutton and turn the programme selector to Finish. The Anti-crease/ Finish light will then go out.

NClose the drum door

Otherwise there is the danger of objects being placed inadvertently in the drum. If these remained unnoticed and were washed in the next load, they could damage the laundry.

25

Image 25

Contents

Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Technical data Correct usage Technical safetyUse Accessories Safety with childrenDisposal of your old machine Special programmes Description of the machineDelicates and Silks / programmes Water plus systemFuture updates PC Control panel Programme duration Spin button with indicator lights Select the spin speed Important control panel featuresProgramme selector Additional option buttonsBefore using for the first time Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentBrief instructions How to wash correctlyMinimum iron 30C to 60C Programme chart Cottons 30C to 95C 9ö876Silks 30C /c Delicates cold to 40CWoollens cold to 40C /ac Automatic 40C Quick wash 40CStarch Separate rinseTumble dry Garment care label symbolsIroning ASort the laundry Before washingSelecting a programme Intensive Additional options HSelect additional optionsPre-wash SoakJPress the Start button IAdding detergentAt the end of a programme MSwitch off the washing machineKOpen the drum door LRemove the laundryPlease note Adding or removing laundry after a programme has startedDoor cannot be opened, if Interrupting a programme To cancel or select a different programmeAltering a programme once selected Skipping a programme stageMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Water softeners DetergentWashing with several components Liquid detergentColour run and dye removers/ dyes Fabric conditioners and liquid starchAdding fabric conditioner separately Adding starch separatelyExtra cleaning Cleaning and careCloth Clean the siphon Cleaning the detergent dispenser drawerTo clean the filter in the water inlet valve Cleaning the water inlet filtersProblem Possible cause Remedy Problem solving guideProgramme does not start Problem Possible cause Remedy a Wash programme stops and a fault indicator light comes onWater protection Call the Service Department System has reacted Flashing Appears in the displayFlashes Indicator light isCheck light comes on General problems or an unsatisfactory wash result Does not give Problem Possible cause Remedy Liquid detergentRequired result Grey, greasyDrum door does not open when you press the Door button Procedure for draining the machine Use it to open the access flapRemove the lever Blocked drain outletOpening the drum door Customer contact Optional accessoriesFront view Installation and connectionRear view Installing the washing machine Installation surfaceRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher and Dryer stack Building under a continuous worktop/in a kitchen runReplacing the lid Miele water protection system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water supply Maintenance and careExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing standard settings Programmable functions Settings are as followsWater plus system Programmable functions Follow steps a to G to programme and store in memory Gentle actionTop-up rinse for Cottons Memory Function Soak Alteration rights reserved/5104/W