Miele W 2240 Problem solving guide, Programme does not start, Problem Possible cause Remedy

Page 35

Problem solving guide

With the help of the following notes minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department.

,Repair work to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations. Unauthorised repairs could be dangerous.

The programme does not start.

Problem	Possible cause	Remedy
The Anti-crease/Finish	There is no power.	Check that
indicator light is not		– the mains plug is plugged
on, or the Start		in and switched on.
indicator light is not		– the fuse or circuit breaker
flashing.		– the fuse or circuit breaker
flashing.		has not tripped.
		has not tripped.
The programme does	The washing machine	Prepare the machine as
not start when Drain/	has not been prepared	described in "Before using
Spin has been	for using for the first time.	for the first time".
selected.

35

Image 35

Contents Operating instructions for Washing machine W Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents Contents Technical data Correct usage Technical safetyUse Disposal of your old machine Safety with childrenAccessories Water plus system Description of the machineSpecial programmes Delicates and Silks / programmesFuture updates PC Control panel Programme duration Additional option buttons Important control panel featuresSpin button with indicator lights Select the spin speed Programme selectorBefore using for the first time Detergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumptionBrief instructions How to wash correctlyMinimum iron 30C to 60C Programme chart Cottons 30C to 95C 9ö876Woollens cold to 40C /ac Delicates cold to 40CSilks 30C /c Separate rinse Quick wash 40CAutomatic 40C StarchIroning Garment care label symbolsTumble dry ASort the laundry Before washingSelecting a programme Soak Additional options HSelect additional optionsIntensive Pre-washJPress the Start button IAdding detergentLRemove the laundry MSwitch off the washing machineAt the end of a programme KOpen the drum doorDoor cannot be opened, if Adding or removing laundry after a programme has startedPlease note Skipping a programme stage To cancel or select a different programmeInterrupting a programme Altering a programme once selectedMain wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Liquid detergent DetergentWater softeners Washing with several componentsAdding starch separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Adding fabric conditioner separatelyCloth Cleaning and careExtra cleaning Clean the siphon Cleaning the detergent dispenser drawerTo clean the filter in the water inlet valve Cleaning the water inlet filtersProgramme does not start Problem solving guideProblem Possible cause Remedy System has reacted Flashing Appears in the display Wash programme stops and a fault indicator light comes onProblem Possible cause Remedy a Water protection Call the Service DepartmentCheck light comes on Indicator light isFlashes General problems or an unsatisfactory wash result Grey, greasy Problem Possible cause Remedy Liquid detergentDoes not give Required resultDrum door does not open when you press the Door button Blocked drain outlet Use it to open the access flapProcedure for draining the machine Remove the leverOpening the drum door Customer contact Optional accessoriesFront view Installation and connectionRear view Removing the transit fittings Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetReplacing the lid Building under a continuous worktop/in a kitchen runWasher and Dryer stack Drain hose Electronic unit and washing machine housingMiele water protection system Inlet hoseExtension hose Maintenance and careConnection to the water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing standard settings Water plus system Settings are as followsProgrammable functions Programmable functions Follow steps a to G to programme and store in memory Gentle actionTop-up rinse for Cottons Memory Function Soak Alteration rights reserved/5104/W