Programmable functions
Follow steps A to G to programme and store a setting in memory.
Before you begin, first ensure that:
–The washing machine is switched off.
–The machine is properly closed.
–The programme selector is at Finish.
APress the Start button and keep it pressed in whilst carrying out steps B to C.
BSwitch the machine on with the
CWait until the Start indicator light comes on . . .
D. . . and then release the Start button.
ETurn the programme selector to the Cottons 75°C position:
A P will flash in the display alternating with the number 1, 2, 3 or 4.
FEach subsequent press on the Start button selects a different setting.
The number alternating with the P in the display refers to the settings as follows:
1= Setting 1 is selected (increased water level in the rinses)
2= Setting 2 is selected
(increased water level in the main wash and in the rinses)
3= Setting 3 is selected
(extra rinse in the Cottons and Minimum iron programmes)
4= Setting 4 is selected
(increase in the water level in the main wash and rinses and also an extra rinse in the Cottons and Minimum iron programmes).
GSwitch the washing machine off with the
The Water plus button has now been allocated the setting you have chosen. This setting will remain in memory until another setting is programmed.
59