Miele W 2240 operating instructions Electrical connection U.K, Non-rewireable plugs BS

Page 54

Installation and connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with national and local safety regulations.

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply. The voltage and connected load are given on the data plate. Please ensure these match the household mains supply. The fuse rating is quoted on the plug.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100 Section 739).

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

54

Image 54

Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Technical data Technical safety Correct usageUse Safety with children AccessoriesDisposal of your old machine Delicates and Silks / programmes Description of the machineSpecial programmes Water plus systemFuture updates PC Control panel Programme duration Programme selector Important control panel featuresSpin button with indicator lights Select the spin speed Additional option buttonsBefore using for the first time Energy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentHow to wash correctly Brief instructionsProgramme chart Cottons 30C to 95C 9ö876 Minimum iron 30C to 60CDelicates cold to 40C Silks 30C /cWoollens cold to 40C /ac Starch Quick wash 40CAutomatic 40C Separate rinseGarment care label symbols Tumble dryIroning Before washing ASort the laundrySelecting a programme Pre-wash Additional options HSelect additional optionsIntensive SoakIAdding detergent JPress the Start buttonKOpen the drum door MSwitch off the washing machineAt the end of a programme LRemove the laundryAdding or removing laundry after a programme has started Please noteDoor cannot be opened, if Altering a programme once selected To cancel or select a different programmeInterrupting a programme Skipping a programme stageProgramme sequence Main wash Rinses SpinningSpecial features in the programme sequences Washing with several components DetergentWater softeners Liquid detergentAdding fabric conditioner separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Adding starch separatelyCleaning and care Extra cleaningCloth Cleaning the detergent dispenser drawer Clean the siphonCleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Problem Possible cause RemedyProgramme does not start Water protection Call the Service Department Wash programme stops and a fault indicator light comes onProblem Possible cause Remedy a System has reacted Flashing Appears in the displayIndicator light is FlashesCheck light comes on General problems or an unsatisfactory wash result Required result Problem Possible cause Remedy Liquid detergentDoes not give Grey, greasyDrum door does not open when you press the Door button Remove the lever Use it to open the access flapProcedure for draining the machine Blocked drain outletOpening the drum door Optional accessories Customer contactInstallation and connection Front viewRear view Installation surface Installing the washing machineRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineBuilding under a continuous worktop/in a kitchen run Washer and Dryer stackReplacing the lid Inlet hose Electronic unit and washing machine housingMiele water protection system Drain hoseMaintenance and care Connection to the water supplyExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing standard settings Settings are as follows Programmable functionsWater plus system Programmable functions Gentle action Follow steps a to G to programme and store in memoryTop-up rinse for Cottons Memory Function Soak Alteration rights reserved/5104/W