Miele W 2240 operating instructions Before using for the first time

Page 14

Before using for the first time

Before using the machine for the first time ensure that it is correctly installed and connected. See the relevant section under "Installation". Also check that the fluff filter is securely tightened. Otherwise there is a risk of water leakage during use.

For safety reasons spinning is not possible until the machine has been prepared for using for the first time. To activate the spinning function you must run a wash programme without laundry and without detergent.

Using detergent could result in an excessive build-up of foam.

This also activates the ball valve. The ball valve prevents detergent escaping from the suds container into the sump during a wash programme, thus making maximum use of the detergent.

^Open the stopcock.

^Press the I-On/0-Offbutton in.

^Turn the programme selector to Cottons 40°C.

^Press Start.

When this programme has finished turn the programme selector to Finish. Your washing machine is ready for using for the first time.

14

Image 14

Contents

Operating instructions for Washing machine W Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents Contents Technical data Technical safety Correct usageUse Disposal of your old machine Safety with childrenAccessories Delicates and Silks / programmes Description of the machineSpecial programmes Water plus system Future updates PC Control panel Programme duration Programme selector Important control panel featuresSpin button with indicator lights Select the spin speed Additional option buttonsBefore using for the first time Energy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentHow to wash correctly Brief instructionsProgramme chart Cottons 30C to 95C 9ö876 Minimum iron 30C to 60CWoollens cold to 40C /ac Delicates cold to 40CSilks 30C /c Starch Quick wash 40CAutomatic 40C Separate rinseIroning Garment care label symbolsTumble dry Before washing ASort the laundrySelecting a programme Pre-wash Additional options HSelect additional optionsIntensive SoakIAdding detergent JPress the Start buttonKOpen the drum door MSwitch off the washing machineAt the end of a programme LRemove the laundryDoor cannot be opened, if Adding or removing laundry after a programme has startedPlease note Altering a programme once selected To cancel or select a different programmeInterrupting a programme Skipping a programme stageProgramme sequence Main wash Rinses SpinningSpecial features in the programme sequences Washing with several components DetergentWater softeners Liquid detergentAdding fabric conditioner separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Adding starch separatelyCloth Cleaning and careExtra cleaning Cleaning the detergent dispenser drawer Clean the siphonCleaning the water inlet filters To clean the filter in the water inlet valveProgramme does not start Problem solving guideProblem Possible cause Remedy Water protection Call the Service Department Wash programme stops and a fault indicator light comes onProblem Possible cause Remedy a System has reacted Flashing Appears in the displayCheck light comes on Indicator light isFlashes General problems or an unsatisfactory wash result Required result Problem Possible cause Remedy Liquid detergentDoes not give Grey, greasyDrum door does not open when you press the Door button Remove the lever Use it to open the access flapProcedure for draining the machine Blocked drain outletOpening the drum door Optional accessories Customer contactInstallation and connection Front viewRear view Removing the transit fittings Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineReplacing the lid Building under a continuous worktop/in a kitchen runWasher and Dryer stack Inlet hose Electronic unit and washing machine housingMiele water protection system Drain hoseExtension hose Maintenance and careConnection to the water supply Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing standard settings Water plus system Settings are as followsProgrammable functions Programmable functions Gentle action Follow steps a to G to programme and store in memoryTop-up rinse for Cottons Memory Function Soak Alteration rights reserved/5104/W