Miele Premier 300 operating instructions Selecting a programme

Page 21

How to wash correctly

Selecting a programme

BSwitch on the washing machine

^Press in the I-On/0-Offbutton.

COpen the drum door

^Press the Door button and open the drum door.

DLoad the drum

^Unfold the laundry and load loosely in the drum. To achieve best results it is advisable to make up mixed loads consisting of both large and small items. This improves the washing effect and helps distribute the load evenly to keep the machine stable and reduce the noise level during spinning.

To save energy and water try to load the maximum amount for the programme selected.

However, be careful not to overload the machine. Overloading reduces the wash result and causes more creasing.

EClose the drum door with a gentle swing.

Make sure that no garments are caught between the drum door and seal.

FSelect a programme

^Turn the programme selector to the required programme.

GSelect a spin speed

^Press the "Spin" button repeatedly until the indicator light for the spin speed you want comes on.

In some programmes the maximum spin speed is limited. The machine will not allow a higher spin speed to be selected.

21

Image 21
Contents Operating instructions for Washing machine Premier Caring for our environment Disposal of the packing materialDisposal of your old appliance Contents Contents Consumption data Technical data Correct usage Technical safetyUse Disposal of your old machine AccessoriesSpecial programmes Description of the applianceDelicates and Silks / programmes Water plus systemFuture updates PC Control panel Important control panel features Before using for the first time Washing environmentally and economically Brief instructions How to wash correctlyMinimum iron 4321 Programme chart Cottons 9ö876Delicates Silks /cWoollens /ac + cold Mixed wash Quick washStarch Separate rinseImportant other care symbols Tumble dryIroning ASort the laundry Before washingSelecting a programme Short Additional options HSelect additional options if requiredPre-wash SoakIAdd detergent Liquid detergentJPress the Start button At the end of a programme MSwitch off the washing machineKOpen the drum door LRemove the laundryDoor cannot be opened, if Adding or removing laundry after a programme has startedInterrupting a programme To cancel or select a different programmeAltering a programme once selected Skipping a programme stageCottons Programme sequenceMinimum iron SilksWoollens Special features in the programme sequencesWater softeners DetergentWashing with several components Right amount to dispense will depend on the followingColour run and dye removers/dyes Fabric conditioners and liquid starchAdding fabric conditioner separately Adding starch separatelyCleaning and care Extra cleaningCloth Clean the siphon Cleaning the detergent dispenser drawerUse it to open the access flap Cleaning the fluff drain filter and pumpProcedure for draining the machine Remove the openerAfter cleaning Clean the fluff filter thoroughlyTo clean the filter in the water inlet valve Cleaning the water inlet filtersChart is divided into the following sections to help you Problem solving guideFault indicator Possible cause Remedy Using for the first time Been selectedFault indicator Possible cause Remedy a Wash programme stops and a fault indicator light comes onIndicator light flashes Main wash indicatorCheck light comes on Light flashesGeneral problems or an unsatisfactory wash result Does not give Problem Possible cause Remedy Liquid detergentRequired result Grey, greasyDrum door does not open when you press the Door button Remove the lever Opening the drum door in the event of a power failureCustomer contact Front view Installation and connectionRear view Installation surface Installing the washing machineRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher and Dryer stack Building under a continuous worktop/in a kitchen runPlease note Replacing the lidMiele water protection system Electronic unit and washing machine housingInlet hose Drain hoseMaintenance and care Connection to the water supplyExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataEnergy DurationTechnical data Page Programmable functions for changing standard settings Settings are as follows Programmable functionsWater plus system Programmable functions Gentle action Follow steps a to G to programme and store in memoryHas been activated Does not flash Top-up rinse for CottonsBeen activated ActivatedMemory function Soak Page Page Alteration rights reserved/4103