Miele Premier 300 operating instructions Soak

Page 65

Programmable functions

Soak

A length of time of between 30 minutes and 2 hours can be programmed in 30 minute increments for the soak process.

If the soak button is pressed the selected soak time will be carried out for the period selected before the wash programme is run.

The machine is set as standard to a two hour soak time.

Follow steps A to G to programme and store in memory.

Before you begin, first ensure that:

–The washing machine is switched off.

–The machine is properly closed.

–The programme selector is at Finish.

APress the Start button and keep it pressed in whilst carrying out steps B to C.

BSwitch the machine on with the I-On/0-Offbutton.

CWait until the Start indicator light comes on . . .

D. . . and then release the Start button.

ETurn the programme selector to the Minimum iron 60°C position:

The Soak/Pre-wash sequence indicator light will briefly flash once every 2 seconds, to show that a soak time of 2 hours is stored in memory.

FEach subsequent press on the Start button selects a different setting.

If the Soak/Pre-washsequence indicator light:

–flashes x 1 = the soak time is

2hours

–flashes x 2 = the soak time is

1hour 30 minutes

–flashes x 3 = the soak time is

1hour

–flashes x 4 = the soak time is

30minutes

GSwitch the machine off with the I-On/0-Offbutton.

The Soak button has now been allocated the setting you have chosen. This setting will remain in memory until another setting is programmed.

65

Image 65

Contents Operating instructions for Washing machine Premier Disposal of your old appliance Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Correct usage Technical safetyUse Disposal of your old machine AccessoriesSpecial programmes Description of the applianceDelicates and Silks / programmes Water plus systemFuture updates PC Control panel Important control panel features Before using for the first time Washing environmentally and economically Brief instructions How to wash correctlyMinimum iron 4321 Programme chart Cottons 9ö876Woollens /ac + cold DelicatesSilks /c Mixed wash Quick washStarch Separate rinseIroning Important other care symbolsTumble dry ASort the laundry Before washingSelecting a programme Short Additional options HSelect additional options if requiredPre-wash SoakJPress the Start button IAdd detergentLiquid detergent At the end of a programme MSwitch off the washing machineKOpen the drum door LRemove the laundryDoor cannot be opened, if Adding or removing laundry after a programme has startedInterrupting a programme To cancel or select a different programmeAltering a programme once selected Skipping a programme stageCottons Programme sequenceMinimum iron SilksWoollens Special features in the programme sequencesWater softeners DetergentWashing with several components Right amount to dispense will depend on the followingColour run and dye removers/dyes Fabric conditioners and liquid starchAdding fabric conditioner separately Adding starch separatelyCloth Cleaning and careExtra cleaning Clean the siphon Cleaning the detergent dispenser drawerUse it to open the access flap Cleaning the fluff drain filter and pumpProcedure for draining the machine Remove the openerAfter cleaning Clean the fluff filter thoroughlyTo clean the filter in the water inlet valve Cleaning the water inlet filtersChart is divided into the following sections to help you Problem solving guideFault indicator Possible cause Remedy Using for the first time Been selectedFault indicator Possible cause Remedy a Wash programme stops and a fault indicator light comes onIndicator light flashes Main wash indicatorCheck light comes on Light flashesGeneral problems or an unsatisfactory wash result Does not give Problem Possible cause Remedy Liquid detergentRequired result Grey, greasyDrum door does not open when you press the Door button Remove the lever Opening the drum door in the event of a power failureCustomer contact Front view Installation and connectionRear view Removing the transit fittings Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher and Dryer stack Building under a continuous worktop/in a kitchen runPlease note Replacing the lidMiele water protection system Electronic unit and washing machine housingInlet hose Drain hoseExtension hose Maintenance and careConnection to the water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataEnergy DurationTechnical data Page Programmable functions for changing standard settings Water plus system Settings are as followsProgrammable functions Programmable functions Has been activated Gentle actionFollow steps a to G to programme and store in memory Does not flash Top-up rinse for CottonsBeen activated ActivatedMemory function Soak Page Page Alteration rights reserved/4103