Miele Premier 300 Interrupting a programme, Altering a programme once selected

Page 26

How to wash correctly

Interrupting a programme

^Switch the washing machine off with the I-On/0-Offbutton.

To continue with the same programme:

^Switch the washing machine back on again with the I-On/0-Offbutton.

Altering a programme once selected

The machine will accept the following changes after a programme has started:

–at any time after the start, the spin speed can be changed within the limits for the programme.

–up to 6 minutes after the start, the Water plus additional option can be selected or de-selected and a different temperature can be selected for the programme in use.

After the start of a programme it is no longer possible to select a different programme.

If the programme selector is moved, the indicator light Anti-crease/Finishwill start flashing. However, the programme sequence remains unaffected. The indicator light will go out again when the programme selector is moved back to the programme previously chosen.

Skipping a programme stage

^Turn the programme selector to Finish.

As soon as the programme sequence indicator light for the programme stage you want the programme to continue at starts flashing:

^Turn the programme selector back again to the appropriate programme within 4 seconds.

To cancel or select a different programme

^Switch the washing machine off with the I-On/0-Offbutton.

^Turn the programme selector to Finish.

The programme has now been cancelled.

^Switch the washing machine back on with the I-On/0-Offbutton.

^Select a different programme.

^Press the Start button.

26

Image 26

Contents Operating instructions for Washing machine Premier Disposal of your old appliance Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Technical safety Correct usageUse Accessories Disposal of your old machineDelicates and Silks / programmes Description of the applianceSpecial programmes Water plus systemFuture updates PC Control panel Important control panel features Before using for the first time Washing environmentally and economically How to wash correctly Brief instructionsProgramme chart Cottons 9ö876 Minimum iron 4321Woollens /ac + cold DelicatesSilks /c Starch Quick washMixed wash Separate rinseIroning Important other care symbolsTumble dry Before washing ASort the laundrySelecting a programme Pre-wash Additional options HSelect additional options if requiredShort SoakJPress the Start button IAdd detergentLiquid detergent KOpen the drum door MSwitch off the washing machineAt the end of a programme LRemove the laundryAdding or removing laundry after a programme has started Door cannot be opened, ifAltering a programme once selected To cancel or select a different programmeInterrupting a programme Skipping a programme stageMinimum iron Programme sequenceCottons SilksSpecial features in the programme sequences WoollensWashing with several components DetergentWater softeners Right amount to dispense will depend on the followingAdding fabric conditioner separately Fabric conditioners and liquid starchColour run and dye removers/dyes Adding starch separatelyCloth Cleaning and careExtra cleaning Cleaning the detergent dispenser drawer Clean the siphonProcedure for draining the machine Cleaning the fluff drain filter and pumpUse it to open the access flap Remove the openerClean the fluff filter thoroughly After cleaningCleaning the water inlet filters To clean the filter in the water inlet valveFault indicator Possible cause Remedy Problem solving guideChart is divided into the following sections to help you Using for the first time Been selectedWash programme stops and a fault indicator light comes on Fault indicator Possible cause Remedy aCheck light comes on Main wash indicatorIndicator light flashes Light flashesGeneral problems or an unsatisfactory wash result Required result Problem Possible cause Remedy Liquid detergentDoes not give Grey, greasyDrum door does not open when you press the Door button Opening the drum door in the event of a power failure Remove the leverCustomer contact Installation and connection Front viewRear view Removing the transit fittings Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machinePlease note Building under a continuous worktop/in a kitchen runWasher and Dryer stack Replacing the lidInlet hose Electronic unit and washing machine housingMiele water protection system Drain hoseExtension hose Maintenance and careConnection to the water supply Connection to the drainage system Drain hose connectionElectrical connection U.K Non-rewireable plugs BS Energy Consumption dataProgramme Load Consumption data DurationTechnical data Page Programmable functions for changing standard settings Water plus system Settings are as followsProgrammable functions Programmable functions Has been activated Gentle actionFollow steps a to G to programme and store in memory Been activated Top-up rinse for CottonsDoes not flash ActivatedMemory function Soak Page Page Alteration rights reserved/4103