Installation and connection
Electrical connection U.K.
All electrical work should be carried out only by a suitably qualified and competent person, in strict accordance with national and local safety regulations.
The appliance is supplied with a mains cable with moulded plug for connection to a
Connection should be made via a fused plug and suitable switched socket which is easily accessible after installation.
For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100 Section 739).
Do not connect via an extension lead.
Important
The wires in the mains lead are coloured in accordance with the following code:
Green/yellow | = earth |
Blue | = neutral |
Brown | = live |
Where it is necessary to change plugs, if the colours of the wires in the mains lead of this appliance do not correspond with the coloured markings identifying the terminals of your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol
zor coloured green, or green and yellow.
The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal in the plug which is marked with the letter L or coloured red.
WARNING: THIS APPLIANCE MUST BE EARTHED
Ensure power is not supplied to the appliance while installation work is being carried out.
54