Miele Essential Installation and Maintenance Tips for Washers

Page 52

Installation and connection

Connection to the water supply

The machine should be connected to a mains water supply in accordance with local and national safety regulations.

The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations.

The machine is designed to operate with a flow pressure of between

100 kPa and 1,000 kPa. If it is higher than 1,000 kPa it is essential to fit a reducer valve.

Connection to the mains water supply should incorporate a mains stopcock with 3/4" thread. The stopcock should be fitted by a qualified plumber.

,The connection point is subject to mains water pressure. Turn on the stopcock slowly and check for leaks. Correct the position of the washer and union if appropriate.

The washing machine is not suitable for connection to a hot water supply and connection to a household wa- ter softener is not recommended.

Maintenance and care

Only use a genuine Miele hose should you ever need a replacement or extension. These are tested to withstand pressure of at least

7,000 kPa.

In order to protect the water inlet valve, the two dirt filters - one in the open end of the inlet hose, one at the inlet point in the machine must not be removed.

Extension hose

Longer hoses 2.5 or 4.0 m in length are available from your Miele dealer or the Miele Spare Parts Department as optional extras.

52

Image 52
Contents Operating instructions for Washing machine Premier Disposal of the packing material Caring for our environmentDisposal of your old appliance Contents Contents Consumption data Technical data Technical safety Correct usageUse Accessories Disposal of your old machineDescription of the appliance Special programmesDelicates and Silks / programmes Water plus systemFuture updates PC Control panel Important control panel features Before using for the first time Washing environmentally and economically How to wash correctly Brief instructionsProgramme chart Cottons 9ö876 Minimum iron 4321Silks /c DelicatesWoollens /ac + cold Quick wash Mixed washStarch Separate rinseTumble dry Important other care symbolsIroning Before washing ASort the laundrySelecting a programme Additional options HSelect additional options if required ShortPre-wash SoakLiquid detergent IAdd detergentJPress the Start button MSwitch off the washing machine At the end of a programmeKOpen the drum door LRemove the laundryAdding or removing laundry after a programme has started Door cannot be opened, ifTo cancel or select a different programme Interrupting a programmeAltering a programme once selected Skipping a programme stageProgramme sequence CottonsMinimum iron SilksSpecial features in the programme sequences WoollensDetergent Water softenersWashing with several components Right amount to dispense will depend on the followingFabric conditioners and liquid starch Colour run and dye removers/dyesAdding fabric conditioner separately Adding starch separatelyExtra cleaning Cleaning and careCloth Cleaning the detergent dispenser drawer Clean the siphonCleaning the fluff drain filter and pump Use it to open the access flapProcedure for draining the machine Remove the openerClean the fluff filter thoroughly After cleaningCleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Chart is divided into the following sections to help youFault indicator Possible cause Remedy Using for the first time Been selectedWash programme stops and a fault indicator light comes on Fault indicator Possible cause Remedy aMain wash indicator Indicator light flashesCheck light comes on Light flashesGeneral problems or an unsatisfactory wash result Problem Possible cause Remedy Liquid detergent Does not giveRequired result Grey, greasyDrum door does not open when you press the Door button Opening the drum door in the event of a power failure Remove the leverCustomer contact Installation and connection Front viewRear view Installing the washing machine Installation surfaceRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineBuilding under a continuous worktop/in a kitchen run Washer and Dryer stackPlease note Replacing the lidElectronic unit and washing machine housing Miele water protection systemInlet hose Drain hoseConnection to the water supply Maintenance and careExtension hose Connection to the drainage system Drain hose connectionElectrical connection U.K Non-rewireable plugs BS Consumption data Programme Load Consumption dataEnergy DurationTechnical data Page Programmable functions for changing standard settings Programmable functions Settings are as followsWater plus system Programmable functions Follow steps a to G to programme and store in memory Gentle actionHas been activated Top-up rinse for Cottons Does not flashBeen activated ActivatedMemory function Soak Page Page Alteration rights reserved/4103