Miele Premier 300 Gentle action, Follow steps a to G to programme and store in memory

Page 62

Programmable functions

Gentle action

Activating gentle action reduces the drum action. Slightly soiled items are washed more gently. It should be activated for garments with a single bar under the care label and for articles which feel too hard after they have been dried.

Gentle action can be used with the Cottons, Quick wash, Starch and Mixed wash programmes.

If "Gentle action" is programmed into the machine, every wash cycle in these programmes will be carried out with gentle action rhythm.

The washing machine is delivered with "Gentle action" de-activated.

Follow steps A to G to programme and store in memory.

Before you begin, first ensure that:

–The washing machine is switched off.

–The machine is properly closed.

–The programme selector is at Finish.

APress the Start button and keep it pressed in whilst carrying out steps B to C.

BSwitch the machine on with the I-On/0-Offbutton.

CWait until the Start indicator light comes on . . .

D. . . and then release the Start button.

ETurn the programme selector to the Cottons 60°C position:

If the Soak/Pre-washsequence indicator light:

does not flash = Gentle action has not been activated.

flashes = Gentle action

has been activated.

FPress the Start button to activate or deactivate the Gentle action option.

GSwitch the washing machine off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory and will remain so until you alter it.

62

Image 62

Contents Operating instructions for Washing machine Premier Disposal of your old appliance Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Technical safety Correct usageUse Accessories Disposal of your old machineDelicates and Silks / programmes Description of the applianceSpecial programmes Water plus systemFuture updates PC Control panel Important control panel features Before using for the first time Washing environmentally and economically How to wash correctly Brief instructionsProgramme chart Cottons 9ö876 Minimum iron 4321Woollens /ac + cold DelicatesSilks /c Starch Quick washMixed wash Separate rinseIroning Important other care symbolsTumble dry Before washing ASort the laundrySelecting a programme Pre-wash Additional options HSelect additional options if requiredShort SoakJPress the Start button IAdd detergentLiquid detergent KOpen the drum door MSwitch off the washing machineAt the end of a programme LRemove the laundryAdding or removing laundry after a programme has started Door cannot be opened, ifAltering a programme once selected To cancel or select a different programmeInterrupting a programme Skipping a programme stageMinimum iron Programme sequenceCottons SilksSpecial features in the programme sequences WoollensWashing with several components DetergentWater softeners Right amount to dispense will depend on the followingAdding fabric conditioner separately Fabric conditioners and liquid starchColour run and dye removers/dyes Adding starch separatelyCloth Cleaning and careExtra cleaning Cleaning the detergent dispenser drawer Clean the siphonProcedure for draining the machine Cleaning the fluff drain filter and pumpUse it to open the access flap Remove the openerClean the fluff filter thoroughly After cleaningCleaning the water inlet filters To clean the filter in the water inlet valveFault indicator Possible cause Remedy Problem solving guideChart is divided into the following sections to help you Using for the first time Been selectedWash programme stops and a fault indicator light comes on Fault indicator Possible cause Remedy aCheck light comes on Main wash indicatorIndicator light flashes Light flashesGeneral problems or an unsatisfactory wash result Required result Problem Possible cause Remedy Liquid detergentDoes not give Grey, greasyDrum door does not open when you press the Door button Opening the drum door in the event of a power failure Remove the leverCustomer contact Installation and connection Front viewRear view Removing the transit fittings Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machinePlease note Building under a continuous worktop/in a kitchen runWasher and Dryer stack Replacing the lidInlet hose Electronic unit and washing machine housingMiele water protection system Drain hoseExtension hose Maintenance and careConnection to the water supply Connection to the drainage system Drain hose connectionElectrical connection U.K Non-rewireable plugs BS Energy Consumption dataProgramme Load Consumption data DurationTechnical data Page Programmable functions for changing standard settings Water plus system Settings are as followsProgrammable functions Programmable functions Has been activated Gentle actionFollow steps a to G to programme and store in memory Been activated Top-up rinse for CottonsDoes not flash ActivatedMemory function Soak Page Page Alteration rights reserved/4103