Miele W 3364 WPS operating instructions Before using for the first time

Page 11

Before using for the first time

Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened. Otherwise there is a risk of water leakage during use.

For safety reasons spinning is not possible until the machine has been prepared for using for the first time. To activate the spinning function you must run a wash programme without laundry and without detergent.

Using detergent could result in an excessive build-up of foam.

This also activates the ball valve. The ball valve prevents detergent escaping from the suds container into the sump during a wash programme, thus making maximum use of the detergent.

^Open the stopcock.

^Press the I-On/0-Offbutton in.

^Turn the programme selector to Cottons 60°C.

^Press Start.

When this programme has finished turn the programme selector to Finish. Your washing machine is ready for using for the first time.

11

Image 11

Contents Operating instructions for Washing machine W 3364 WPS Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Correct usage Technical safetyUse Disposal of your old machine Safety with childrenAccessories Control panel Description of the machineProgrammable functions Delay startProgramme duration Before using for the first time Detergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumptionSort the laundry How to wash correctlyBrief instructions Select programme Shut the door with a gentle swing Switch on the washing machine Load the drumSelect Delay start if required Select additional options Select a spin speed Add detergent Unload the drum Start the programmeSoak Additional optionsShort Pre-washTo omit the final spin Rinse hold SpinningFinal spin speed Rinse and interim spinTo cancel Delay start Delay startSelect Delay start To alter Delay startAutomatic 40C Cottons 30C to 95CMinimum iron* 30C to 60C Delicates cold to 40C 21acProgramme chart Garment care label symbols Main wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeAdding or removing laundry after a programme has started All purpose Detergent for Coloured fabrics Delicates Whites DetergentCorrect detergent Right amount to dispense will depend on the following Water softenersWashing with several components Adding fabric conditioner or starch separately Fabric conditioners and liquid starchColour run and dye removers / dyes External casing and fascia panel Cleaning and careCleaning the detergent dispenser drawer Extra cleaningCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Programme does not start Problem solving guideProblem Possible cause Remedy System has reacted Flashing. - appears Display Wash programme stops and a fault indicator light comes onFault indicator Possible cause Remedy a Water protection Call the Service DepartmentCheck light comes on Indicator light isFlashes General problems An unsatisfactory wash result Drum door does not open when you press the Door button Remove the lever Procedure for draining the machineUse it to open the access flap Blocked drain outletOpening the drum door Optional accessories After sales serviceFuture updates PC Appliance guaranteeFront view Installation and connectionRear view Removing the transit bars Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetReplacing the lid Please noteDrain hose Electronic unit and washing machine housingMiele Waterproof system Inlet hoseConnection to the water supply Extension hose Maintenance and careDrain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing default settings Follow steps a to G to programme and store in memory Programmable functionsWater plus system Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS