Miele W 3364 WPS operating instructions Flashes, Check light comes on, Indicator light is

Page 36

Problem solving guide

A fault indicator light comes on but the wash programme continues as normal.

Fault indicator

Possible cause

Remedy A

The Check drain light

The drain outlet

Clean the drain filter and the drain

flashes.

is restricted.

pump as described in "Problem

 

 

solving guide - Opening the drum

 

 

door in the event of a blocked drain

 

 

outlet and/or power failure".

The Check inlet light

The water inlet is

Check whether

flashes.

restricted.

– the stopcock is opened wide

 

 

enough.

 

 

– the inlet hose is kinked.

 

The filter in the

Clean the filter.

 

water inlet hose

 

 

is dirty.

 

The Excess detergent

Excessive foam

Use less detergent next time and

check light comes on.

has built up

follow the manufacturer’s

 

during washing.

instructions on dosage given on the

 

 

packaging.

The Main wash

There is a fault.

Start the programme again.

indicator light is

 

If the fault indicator occurs again,

flashing.

 

contact the Service Department.

The Anti-crease/Finish

The position of the programme selector was altered

indicator light is

after the start of the programme. Turn the programme

flashing.

selector back to the programme previously chosen.

 

 

 

ATo switch off the fault indicator: switch the washing machine off with the I-On/0-Offbutton and turn the programme selector to d Finish.

36

Image 36
Contents Operating instructions for Washing machine W 3364 WPS Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Consumption data Technical data Technical safety Correct usageUse Safety with children AccessoriesDisposal of your old machine Description of the machine Control panelDelay start Programme durationProgrammable functions Before using for the first time When drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentHow to wash correctly Brief instructionsSort the laundry Switch on the washing machine Load the drum Select Delay start if requiredSelect programme Shut the door with a gentle swing Select additional options Select a spin speed Add detergent Start the programme Unload the drumAdditional options ShortPre-wash SoakSpinning Final spin speedRinse and interim spin To omit the final spin Rinse holdDelay start Select Delay startTo alter Delay start To cancel Delay startCottons 30C to 95C Minimum iron* 30C to 60CDelicates cold to 40C 21ac Automatic 40CProgramme chart Garment care label symbols Programme sequence Main wash Rinses SpinningSpecial features in the programme sequences Cancelling a programme Changing the programme sequenceChanging a programme Interrupting a programmeAdding or removing laundry after a programme has started Detergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesAdding fabric conditioner or starch separately Cleaning and care Cleaning the detergent dispenser drawerExtra cleaning External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem solving guide Problem Possible cause RemedyProgramme does not start Wash programme stops and a fault indicator light comes on Fault indicator Possible cause Remedy aWater protection Call the Service Department System has reacted Flashing. - appears DisplayIndicator light is FlashesCheck light comes on General problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Use it to open the access flapBlocked drain outlet Remove the leverOpening the drum door After sales service Future updates PCAppliance guarantee Optional accessoriesInstallation and connection Front viewRear view Installation surface Installing the washing machineRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machinePlease note Replacing the lidElectronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hoseConnection to the water supply Maintenance and care Extension hoseConnection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing default settings Programmable functions Water plus systemFollow steps a to G to programme and store in memory Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS