Miele W 3364 WPS operating instructions Suds cooling for Cottons

Page 60

Programmable functions

Suds cooling for Cottons

When this is activated, additional water flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes.

Suds cooling takes place when a temperature of 95°C is selected.

Suds cooling should be activated:

–to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin.

–where the drainage pipes do not comply with DIN 1986.

The washing machine is delivered with the Suds cooling option for Cottons deactivated.

Follow steps A to G to programme and store in memory.

Before you begin, first ensure that:

–The washing machine is switched off.

–The machine is properly closed.

–Make sure that the programme selector is at the d Finish position.

APress the Start button and keep it pressed in whilst carrying out steps

B-C.

BSwitch the machine on with the I-On/0-Offbutton.

CWait until the Start button indicator light comes on . . .

D. . . and then release the Start button.

ETurn the programme selector to the Cottons 30°C position:

A P will flash in the display alternating with the number 0 or 1.

0= Suds cooling is deactivated.

1= Suds cooling is activated.

FPress the Start button to change the display from 0 to 1 or from 1 to 0.

GSwitch the machine off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory and will remain so until you alter it.

60

Image 60

Contents Operating instructions for Washing machine W 3364 WPS Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Consumption data Technical data Technical safety Correct usageUse Safety with children AccessoriesDisposal of your old machine Description of the machine Control panelDelay start Programme durationProgrammable functions Before using for the first time When drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentHow to wash correctly Brief instructionsSort the laundry Switch on the washing machine Load the drum Select Delay start if requiredSelect programme Shut the door with a gentle swing Select additional options Select a spin speed Add detergent Start the programme Unload the drumAdditional options ShortPre-wash SoakSpinning Final spin speedRinse and interim spin To omit the final spin Rinse holdDelay start Select Delay startTo alter Delay start To cancel Delay startCottons 30C to 95C Minimum iron* 30C to 60CDelicates cold to 40C 21ac Automatic 40CProgramme chart Garment care label symbols Programme sequence Main wash Rinses SpinningSpecial features in the programme sequences Cancelling a programme Changing the programme sequenceChanging a programme Interrupting a programmeAdding or removing laundry after a programme has started Detergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesAdding fabric conditioner or starch separately Cleaning and care Cleaning the detergent dispenser drawerExtra cleaning External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem solving guide Problem Possible cause RemedyProgramme does not start Wash programme stops and a fault indicator light comes on Fault indicator Possible cause Remedy aWater protection Call the Service Department System has reacted Flashing. - appears DisplayIndicator light is FlashesCheck light comes on General problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Use it to open the access flapBlocked drain outlet Remove the leverOpening the drum door After sales service Future updates PCAppliance guarantee Optional accessoriesInstallation and connection Front viewRear view Installation surface Installing the washing machineRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machinePlease note Replacing the lidElectronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hoseConnection to the water supply Maintenance and care Extension hoseConnection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing default settings Programmable functions Water plus systemFollow steps a to G to programme and store in memory Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS