Miele W 3364 WPS operating instructions Memory function

Page 61

Programmable functions

Memory function

If an additional option is selected for a programme, and / or the spin speed is altered, the machine stores these changes in memory at the start of a programme.

When that particular programme is chosen again, the washing machine will display the additional option(s) and / or spin speed which have been stored for that programme in the memory.

The machine is delivered with the memory function deactivated.

Follow steps A to G to programme and store in memory.

Before you begin, first ensure that:

–The washing machine is switched off.

–The machine is properly closed.

–Make sure that the programme selector is at the d Finish position.

APress the Start button and keep it pressed in whilst carrying out steps

B-C.

BSwitch the machine on with the I-On/0-Offbutton.

CWait until the Start button indicator light comes on . . .

D. . . and then release the Start button.

ETurn the programme selector to Minimum iron 60°C:

A P will flash in the display alternating with the number 0 or 1.

0= the memory function is deactivated.

1= the memory function is activated.

FPress the Start button to change the display from 0 to 1 or from 1 to 0.

GSwitch the machine off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory and will remain so until you alter it.

61

Image 61

Contents Operating instructions for Washing machine W 3364 WPS Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Consumption data Technical data Correct usage Technical safetyUse Accessories Safety with childrenDisposal of your old machine Control panel Description of the machineProgramme duration Delay startProgrammable functions Before using for the first time Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentBrief instructions How to wash correctlySort the laundry Select Delay start if required Switch on the washing machine Load the drumSelect programme Shut the door with a gentle swing Select additional options Select a spin speed Add detergent Unload the drum Start the programmeShort Additional optionsPre-wash SoakFinal spin speed SpinningRinse and interim spin To omit the final spin Rinse holdSelect Delay start Delay startTo alter Delay start To cancel Delay startMinimum iron* 30C to 60C Cottons 30C to 95CDelicates cold to 40C 21ac Automatic 40CProgramme chart Garment care label symbols Main wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Changing the programme sequence Cancelling a programmeChanging a programme Interrupting a programmeAdding or removing laundry after a programme has started Correct detergent DetergentAll purpose Detergent for Coloured fabrics Delicates Whites Washing with several components Water softenersRight amount to dispense will depend on the following Colour run and dye removers / dyes Fabric conditioners and liquid starchAdding fabric conditioner or starch separately Cleaning the detergent dispenser drawer Cleaning and careExtra cleaning External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem Possible cause Remedy Problem solving guideProgramme does not start Fault indicator Possible cause Remedy a Wash programme stops and a fault indicator light comes onWater protection Call the Service Department System has reacted Flashing. - appears DisplayFlashes Indicator light isCheck light comes on General problems An unsatisfactory wash result Drum door does not open when you press the Door button Use it to open the access flap Procedure for draining the machineBlocked drain outlet Remove the leverOpening the drum door Future updates PC After sales serviceAppliance guarantee Optional accessoriesFront view Installation and connectionRear view Installing the washing machine Installation surfaceRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetReplacing the lid Please noteMiele Waterproof system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water supply Extension hose Maintenance and careDrain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing default settings Water plus system Programmable functionsFollow steps a to G to programme and store in memory Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS