Miele W 3364 WPS operating instructions Connection to the water supply

Page 51

Installation and connection

Connection to the water supply

,The plastic casing of the safety valve contains electrical components. The Waterproof system must only be connected to its own stopcock. It must not be connected to mixer taps or similar and must not be fitted in areas where there is the risk of water or other liquids reaching it.

Do not get wet.

The protective sleeve of the hose must not be damaged or kinked.

The machine should be connected to the mains water supply in accordance with local and national safety regulations. The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations.

The machine is designed to operate with a flow pressure of between 100 and 1,000 kPa (1-10 bar). If it is higher than 1,000 kPa it is essential to fit a pressure reducing valve.

Connection to the mains water supply should incorporate a mains stopcock with 3/4" thread. The stopcock should be fitted by a qualified plumber.

,The connection point is subject to mains water pressure. Turn on the stopcock slowly and check for leaks. Correct the position of the washer and union if appropriate.

The washing machine is not suitable for connection to a hot water supply and connection to a household water softener is not recommended.

51

Image 51

Contents Operating instructions for Washing machine W 3364 WPS Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Consumption data Technical data Correct usage Technical safetyUse Safety with children AccessoriesDisposal of your old machine Control panel Description of the machineDelay start Programme durationProgrammable functions Before using for the first time Detergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumptionHow to wash correctly Brief instructionsSort the laundry Switch on the washing machine Load the drum Select Delay start if requiredSelect programme Shut the door with a gentle swing Select additional options Select a spin speed Add detergent Unload the drum Start the programmeSoak Additional optionsShort Pre-washTo omit the final spin Rinse hold SpinningFinal spin speed Rinse and interim spinTo cancel Delay start Delay startSelect Delay start To alter Delay startAutomatic 40C Cottons 30C to 95CMinimum iron* 30C to 60C Delicates cold to 40C 21acProgramme chart Garment care label symbols Main wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeAdding or removing laundry after a programme has started Detergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesAdding fabric conditioner or starch separately External casing and fascia panel Cleaning and careCleaning the detergent dispenser drawer Extra cleaningCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem solving guide Problem Possible cause RemedyProgramme does not start System has reacted Flashing. - appears Display Wash programme stops and a fault indicator light comes onFault indicator Possible cause Remedy a Water protection Call the Service DepartmentIndicator light is FlashesCheck light comes on General problems An unsatisfactory wash result Drum door does not open when you press the Door button Remove the lever Procedure for draining the machineUse it to open the access flap Blocked drain outletOpening the drum door Optional accessories After sales serviceFuture updates PC Appliance guaranteeFront view Installation and connectionRear view Installation surface Installing the washing machineRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetReplacing the lid Please noteDrain hose Electronic unit and washing machine housingMiele Waterproof system Inlet hoseConnection to the water supply Extension hose Maintenance and careDrain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing default settings Programmable functions Water plus systemFollow steps a to G to programme and store in memory Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS