Miele W 3364 WPS operating instructions Soak duration

Page 62

Programmable functions

Soak duration

A length of time of between 30 minutes and 2 hours can be programmed in 30 minute increments for the soak process.

If the Soak option is pressed, the selected soak time will be carried out for the period selected before the wash programme is run.

The machine is delivered with a two hour soak time set as standard.

Follow steps A to G to programme and store in memory.

Before you begin, first ensure that:

–The washing machine is switched off.

–The machine is properly closed.

–Make sure that the programme selector is at the d Finish position.

APress the Start button and keep it pressed in whilst carrying out steps

B-C.

BSwitch the machine on with the I-On/0-Offbutton.

CWait until the Start button indicator light comes on . . .

D. . . and then release the Start button.

ETurn the programme selector to Minimum iron 40°C:

A P will flash in the display alternating with the number 1, 2, 3 or 4.

FEach subsequent press on the Start button selects a different setting.

The number alternating with the P in the display refers to the settings as follows:

1= the soak time is 2 hours (default setting)

2= the soak time is 1 hour 30 minutes

3= the soak time is 1 hour

4= the soak time is 30 minutes

GSwitch the machine off with the I-On/0-Offbutton.

The Soak button has now been allocated the setting you have chosen. This setting will remain in memory until another setting is programmed.

62

Image 62

Contents Operating instructions for Washing machine W 3364 WPS Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Technical safety Correct usageUse Disposal of your old machine Safety with childrenAccessories Description of the machine Control panelProgrammable functions Delay startProgramme duration Before using for the first time Energy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentSort the laundry How to wash correctlyBrief instructions Select programme Shut the door with a gentle swing Switch on the washing machine Load the drumSelect Delay start if required Select additional options Select a spin speed Add detergent Start the programme Unload the drumPre-wash Additional optionsShort SoakRinse and interim spin SpinningFinal spin speed To omit the final spin Rinse holdTo alter Delay start Delay startSelect Delay start To cancel Delay startDelicates cold to 40C 21ac Cottons 30C to 95CMinimum iron* 30C to 60C Automatic 40CProgramme chart Garment care label symbols Programme sequence Main wash Rinses SpinningSpecial features in the programme sequences Changing a programme Cancelling a programmeChanging the programme sequence Interrupting a programmeAdding or removing laundry after a programme has started All purpose Detergent for Coloured fabrics Delicates Whites DetergentCorrect detergent Right amount to dispense will depend on the following Water softenersWashing with several components Adding fabric conditioner or starch separately Fabric conditioners and liquid starchColour run and dye removers / dyes Extra cleaning Cleaning and careCleaning the detergent dispenser drawer External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Programme does not start Problem solving guideProblem Possible cause Remedy Water protection Call the Service Department Wash programme stops and a fault indicator light comes onFault indicator Possible cause Remedy a System has reacted Flashing. - appears DisplayCheck light comes on Indicator light isFlashes General problems An unsatisfactory wash result Drum door does not open when you press the Door button Blocked drain outlet Procedure for draining the machineUse it to open the access flap Remove the leverOpening the drum door Appliance guarantee After sales serviceFuture updates PC Optional accessoriesInstallation and connection Front viewRear view Removing the transit bars Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machinePlease note Replacing the lidInlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hoseConnection to the water supply Maintenance and care Extension hoseConnection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data Technical data Programmable functions For changing default settings Follow steps a to G to programme and store in memory Programmable functionsWater plus system Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS