Miele Troubleshooting Check Inlet and Fault Indicator Lights on Washing Machines

Page 35

Problem solving guide

The wash programme stops and a fault indicator light comes on.

Fault indicator	Possible cause	Remedy A
The Check drain light	The water outlet is	Clean the drain filter and the
flashes. "– – –" appears	blocked.	drain pump as described in
in the display.		"Problem solving guide -
		Opening the drum door in the
		event of a blocked drain outlet
		and/or power failure".
	The drain hose has	The maximum delivery head
	been fixed too high.	is 1 m.
The Check inlet light	The water inlet is	Open the stopcock.
flashes. "– – –" appears	blocked.
in the display.	The filter in the water	Clean the filter.
	The filter in the water	Clean the filter.
	inlet hose is dirty.
The Check inlet and	The water protection	Call the Service Department.
Check drain lights are	system has reacted.
flashing. "– – –" appears
in the display.
The Soak/Pre-wash or	There is a fault.	Start the programme again.
Rinses indicator light is		If the fault indicator occurs
flashing. "– – –" appears		again, contact the Service
in the display.		Department.

ATo switch off the fault indicator: switch the washing machine off with the I-On/0-Offbutton and turn the programme selector to d Finish.

35

Image 35

Contents Operating instructions for Washing machine W 3364 WPS Disposal of your old appliance or machine Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Correct usage Technical safetyUse Disposal of your old machine Safety with childrenAccessories Control panel Description of the machineProgrammable functions Delay startProgramme duration Before using for the first time Detergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumptionSort the laundry How to wash correctlyBrief instructions Select programme Shut the door with a gentle swing Switch on the washing machine Load the drumSelect Delay start if required Select additional options Select a spin speed Add detergent Unload the drum Start the programmeSoak Additional optionsShort Pre-washTo omit the final spin Rinse hold SpinningFinal spin speed Rinse and interim spinTo cancel Delay start Delay startSelect Delay start To alter Delay startAutomatic 40C Cottons 30C to 95CMinimum iron* 30C to 60C Delicates cold to 40C 21acProgramme chart Garment care label symbols Main wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeAdding or removing laundry after a programme has started All purpose Detergent for Coloured fabrics Delicates Whites DetergentCorrect detergent Right amount to dispense will depend on the following Water softenersWashing with several components Adding fabric conditioner or starch separately Fabric conditioners and liquid starchColour run and dye removers / dyes External casing and fascia panel Cleaning and careCleaning the detergent dispenser drawer Extra cleaningCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Programme does not start Problem solving guideProblem Possible cause Remedy System has reacted Flashing. - appears Display Wash programme stops and a fault indicator light comes onFault indicator Possible cause Remedy a Water protection Call the Service DepartmentCheck light comes on Indicator light isFlashes General problems An unsatisfactory wash result Drum door does not open when you press the Door button Remove the lever Procedure for draining the machineUse it to open the access flap Blocked drain outletOpening the drum door Optional accessories After sales serviceFuture updates PC Appliance guaranteeFront view Installation and connectionRear view Removing the transit bars Installation surfaceInstalling the washing machine Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetReplacing the lid Please noteDrain hose Electronic unit and washing machine housingMiele Waterproof system Inlet hoseConnection to the water supply Extension hose Maintenance and careDrain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSConsumption data Technical data Programmable functions For changing default settings Follow steps a to G to programme and store in memory Programmable functionsWater plus system Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS