Miele PW 6065 manual Load the washer, Select a program, Coin mechanism

Page 13

Using the washer

2. Load the washer

^Open the drum door using the a button.

The drum light comes on.

^Load the laundry loosely into the drum.

For best results, wash mixed loads of small and large items. This will improve washing effectiveness and help distribute the load evenly.

For the lowest energy and water consumption load the washer to its max. capacity. See "Program guide".

Note: Overloading the washer will affect wash results and cause wrinkling.

^Close the drum door.

Close the drum door. To prevent damage to the door seal and clothing, make sure that there are no clothes caught between the drum door and the seal.

3. Select a program

Two program selection possibilities:

Select a "Favorite" by pressing the respective direct select button.

Select from the "Program selection" menu by turning the jog shuttle.

^If desired select "Extras" and/or a delay start time with the respective submenus.

Coin mechanism

If a coin mechanism operates the machine, please regard the displayed request to pay.

If the door is opened after a program has started or if the program is canceled the credit is lost.

13

Image 13
Contents Operating manual Washer PW 6065 Plus Page Contents Contents Technical Safety Important Safety InstructionsUse Children Using accessoriesControl panel Guide to the washerMain menu Display functionProgram selection possibility Menu Program selection Settings J Basic menu of a wash program Before using for the first time Sort the laundry Using the washerGeneral tips Select a program Load the washerCoin mechanism Too little detergent may cause Adding detergentToo much detergent may cause At the end of a program Starting a programTo change a program To cancel a programTo change a program Adding/removing laundry during a wash programCottons Uni F to cold 60C to cold Cottons Hygiene 203F to 158F 95C to 70CMinimum iron 140F to 86F 60C to 30C Delicates 140F to 86F 60C to 30CProgram guide Kitchen linen 203F to 140F 95C to 60C Additional programsTable linen 140F to 86F 60C to 30C Curtains 104F to cold 40C to coldProofing 104F to 86F 40C to 30C Outerwear 104F to cold 40C to coldHygiene Disinfection programsSluice 167F 75C or Sluice 149F 65C Main wash Rinse Spin Program sequenceHigh Spin Special features in the program sequence Anti-creasePre-rinse OuterwearSpin speed SpinRinse spin Without final spinOptions Accessing the sub-menu ExtrasPre-wash Starch StopIntensive Rinse StopWater plus Select the sub-menu Delay Start Delay StartSelect the Delay Start time Starting the Delay StartSelecting/Changing a Favorite FavoritesBasic menu Select a programSelecting the spin speed Selecting a temperatureAssigning a direct select button Saving a FavoriteWater hardness DetergentWater softener Normal soilingDye removers / Fabric dyes Fabric softener, liquid starchCleaning the washer Cleaning and CareCleaning the detergent drawer Cleaning the inlet hose filters Cleaning the inlet hose filterCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questionsGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Open the lint trap door Remove the toolMachines with a drain pump Open the drum door Machines with a drain valve Changing the light bulb PC Update After sales serviceOptional accessories RepairsPage Installation Instructions Front view InstallationRear view Reinstallation of the machine lid Washer/ Dryer Stack Installation on a baseCoin mechanism HeightInstallation Installation siteRemoving the shipping struts Do not lift the washer by the drum doorPull out the shipping strut out Pull the shipping strut outInstalling the shipping struts Leveling the washer Water connection MaintenanceCold water connection Extension hosesHot water connection Drain valve DrainageDrain pump For Canada only Electrical connectionTechnical Data Disposal of the packing materials Help to protect the environmentDisposal of an old appliance Menu Settings J To adjust standard settings Opening the menu Settings Settings JSelecting Settings Leaving the Settings menuSuds cooling Language JContrast Time of dayBrightness Selecting the clockNot in current prog. Factory default Temperature unitStandby MemoryEntering the code Settings Supervisor levelConfirming the code Supervisor level Sort languagesIntensive Water plus SavePre-wash water Auto load control Main wash waterRinse water Water level Min. iron Water level CottonsWash time Cottons Pre-wash temp. CotHygiene No. of programs DisinfectionSluice Pre-wash Kitchen linenNo. rinses Cottons Optimize energy Pre-rinse CottonsNo. rinses min. iron Pre-rinse Min. ironNo detergent Leaving the Settings menuExternal dispenser Alteration rights reserved