Settings J
Standby
The display goes out after 10 minutes and the "Start" button flashes slowly to save energy.
On
The display will go into Standby mode:
–if no program was selected after the machine was turned on.
–after a program has started.
–at the end of a program.
Not in current prog. (Factory default)
The Standby function will be turned on if no program was selected after the machine was turned on.
By turning the jog shuttle or pressing any button the display is turned on again.
Memory
The Memory function remembers the addition of an extra feature to a program, a change in spin speed or the temperature the next time that program is selected.
Once the wash program is selected again the washer shows the saved options.
The memory function is not active when favorites are selected with the direct select buttons.
The Memory function is factory set "off".
Temperature unit
The temperature can be shown in "°C/Celsius" (factory default) or "°F/Fahrenheit".
The delivery status is "°C".
63