Miele PW 6065 Spin speed, Rinse spin, Without final spin, Deselect rinse spin and final spin

Page 24

Spin

Spin speed

Program

rpm

Cottons Hygiene

1400

Cottons Uni.

1400

Minimum iron

1000

Delicates

600

Sturdy

1200

Woollens

1200

Silk

400

Shirts

600

Denim

900

Disinfection programs*

1400

Kitchen linen*

1400

Table linen*

1200

Curtains*

400

Pillows*

1400

Outerwear*

900

Proofing*

800

Towelling

1400

Sluice*

1400

Spin

1400

*= Programs can be added from the "Settings - Supervisor level" when activated by the Technical Service.

The final spin speed can be reduced. The speeds above are the highest available.

Rinse spin

The laundry is spun after the main wash and between the rinse cycles. Reducing the final spin speed will also reduce the rinse spin speeds.

Without final spin

^Select "Rinse Stop" from the sub-menu "Extras". The laundry is not spun and remains soaking in water. This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program.

Selecting the final spin

The washer is set default to the maximum spin speed of the wash program. You can select a lower spin speed. Press "Start" to start the final spin.

To finish the program

Press the a button. The water will be drained. Press the a door button to open the door.

Deselect rinse spin and final spin

^Select "Without spin". The laundry is not spun after the final rinse but the water is drained away. After the drain cycle the washer goes immediately into the anti-crease cycle.

24

Image 24
Contents Operating manual Washer PW 6065 Plus Page Contents Contents Important Safety Instructions Technical SafetyUse Using accessories ChildrenGuide to the washer Control panelDisplay function Main menuProgram selection possibility Settings J Menu Program selectionBasic menu of a wash program Before using for the first time Using the washer Sort the laundryGeneral tips Load the washer Select a programCoin mechanism Adding detergent Too little detergent may causeToo much detergent may cause Starting a program At the end of a programTo cancel a program To change a programTo change a program Adding/removing laundry during a wash programCottons Hygiene 203F to 158F 95C to 70C Cottons Uni F to cold 60C to coldMinimum iron 140F to 86F 60C to 30C Delicates 140F to 86F 60C to 30CProgram guide Additional programs Kitchen linen 203F to 140F 95C to 60CTable linen 140F to 86F 60C to 30C Curtains 104F to cold 40C to coldOuterwear 104F to cold 40C to cold Proofing 104F to 86F 40C to 30C Disinfection programs Hygiene Sluice 167F 75C or Sluice 149F 65C Program sequence Main wash Rinse SpinSpecial features in the program sequence Anti-crease High SpinPre-rinse OuterwearSpin Spin speedRinse spin Without final spinAccessing the sub-menu Extras OptionsPre-wash Starch StopRinse Stop IntensiveWater plus Delay Start Select the sub-menu Delay StartSelect the Delay Start time Starting the Delay StartFavorites Selecting/Changing a FavoriteBasic menu Select a programSelecting a temperature Selecting the spin speedSaving a Favorite Assigning a direct select buttonDetergent Water hardnessWater softener Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Open the lint trap doorMachines with a drain pump Open the drum door Machines with a drain valve Changing the light bulb After sales service PC UpdateOptional accessories RepairsPage Installation Instructions Installation Front viewRear view Washer/ Dryer Stack Installation on a base Reinstallation of the machine lidCoin mechanism HeightInstallation site InstallationRemoving the shipping struts Do not lift the washer by the drum doorPull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Maintenance Water connectionCold water connection Extension hosesHot water connection Drainage Drain valveDrain pump Electrical connection For Canada onlyTechnical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings J To adjust standard settings Settings J Opening the menu SettingsSelecting Settings Leaving the Settings menuLanguage J Suds coolingTime of day ContrastBrightness Selecting the clockTemperature unit Not in current prog. Factory defaultStandby MemorySettings Supervisor level Entering the codeConfirming the code Sort languages Supervisor levelIntensive Water plus SaveAuto load control Main wash water Pre-wash waterRinse water Water level Cottons Water level Min. ironWash time Cottons Pre-wash temp. CotNo. of programs Disinfection HygieneSluice Pre-wash Kitchen linenOptimize energy Pre-rinse Cottons No. rinses CottonsNo. rinses min. iron Pre-rinse Min. ironLeaving the Settings menu No detergentExternal dispenser Alteration rights reserved