Miele PW 6065 manual Time of day, Contrast, Brightness, Selecting the clock

Page 62

Settings J

Time of day

The selection allows the clock to be shown as 24 hours, 12 hours or not at all. The time of day is also set here.

If the clock is not selected the delay start can only be shown only as a 24 hour clock timer. The display will how the timer counting down until the start of the program but not he current time of day.

Selecting the clock

^Select the clock display and confirm.

The display changes to the time of day setting.

Set the time of day

^Select the current hour with the jog shuttle and confirm. Repeat with setting the minutes and confirm. Press again to save the time of day.

Contrast

The contrast of the display can be set at ten different levels.

The machine is factory set to level 4.

The contrast changes immediately when a different level is selected.

^Confirm the setting with the jog shuttle.

Brightness

The brightness of the display can be set at ten different levels.

The machine is factory set to level 5.

The brightness changes immediately when a different level is selected.

^Confirm the setting with the jog shuttle.

62

Image 62
Contents Operating manual Washer PW 6065 Plus Page Contents Contents Important Safety Instructions Technical SafetyUse Using accessories ChildrenGuide to the washer Control panelProgram selection possibility Display functionMain menu Basic menu of a wash program Settings JMenu Program selection Before using for the first time General tips Using the washerSort the laundry Coin mechanism Load the washerSelect a program Too much detergent may cause Adding detergentToo little detergent may cause Starting a program At the end of a programTo change a program To cancel a programTo change a program Adding/removing laundry during a wash programMinimum iron 140F to 86F 60C to 30C Cottons Hygiene 203F to 158F 95C to 70CCottons Uni F to cold 60C to cold Delicates 140F to 86F 60C to 30CProgram guide Table linen 140F to 86F 60C to 30C Additional programsKitchen linen 203F to 140F 95C to 60C Curtains 104F to cold 40C to coldOuterwear 104F to cold 40C to cold Proofing 104F to 86F 40C to 30CSluice 167F 75C or Sluice 149F 65C Disinfection programsHygiene Program sequence Main wash Rinse SpinPre-rinse Special features in the program sequence Anti-creaseHigh Spin OuterwearRinse spin SpinSpin speed Without final spinPre-wash Accessing the sub-menu ExtrasOptions Starch StopWater plus Rinse StopIntensive Select the Delay Start time Delay StartSelect the sub-menu Delay Start Starting the Delay StartBasic menu FavoritesSelecting/Changing a Favorite Select a programSelecting a temperature Selecting the spin speedSaving a Favorite Assigning a direct select buttonWater softener DetergentWater hardness Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning the detergent drawer Cleaning and CareCleaning the washer Cleaning the filter in the inlet valve Cleaning the inlet hose filterCleaning the inlet hose filters Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Machines with a drain pump Remove the toolOpen the lint trap door Open the drum door Machines with a drain valve Changing the light bulb Optional accessories After sales servicePC Update RepairsPage Installation Instructions Installation Front viewRear view Coin mechanism Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid HeightRemoving the shipping struts Installation siteInstallation Do not lift the washer by the drum doorPull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Cold water connection MaintenanceWater connection Extension hosesHot water connection Drain pump DrainageDrain valve Electrical connection For Canada onlyTechnical Data Disposal of an old appliance Help to protect the environmentDisposal of the packing materials Menu Settings J To adjust standard settings Selecting Settings Settings JOpening the menu Settings Leaving the Settings menuLanguage J Suds coolingBrightness Time of dayContrast Selecting the clockStandby Temperature unitNot in current prog. Factory default MemorySettings Supervisor level Entering the codeConfirming the code Intensive Water plus Sort languagesSupervisor level SaveRinse water Auto load control Main wash waterPre-wash water Wash time Cottons Water level CottonsWater level Min. iron Pre-wash temp. CotSluice No. of programs DisinfectionHygiene Pre-wash Kitchen linenNo. rinses min. iron Optimize energy Pre-rinse CottonsNo. rinses Cottons Pre-rinse Min. ironExternal dispenser Leaving the Settings menuNo detergent Alteration rights reserved