Frequently asked questions
Changing the light bulb
The machine will not operate if the light bulb is burnt out.
^Disconnect the power supply to the work area by unplugging the unit, tripping the circuit breaker or removing the fuse.
^Open the detergent dispenser drawer. Remove the tool from the rear side of the panel.
^Open the drum door.
^Insert the tool into the slit of the light bulb, turn counterclockwise until resistance is felt.
^Pull out the drum lighting.
^Press together the hooks of the plastic fitting, 2, to separate it from the bulb,1.
^Replace the bad light bulb with a new one.
A replacement bulb can be obtained by contacting Miele.
The light bulb must not exceed the maximum wattage listed on the data plate.
^Insert the light bulb into the plastic fitting.
^Insert the drum lighting in the socket and turn clockwise.
To use the washer it is absolutely necessary to have the light bulb properly installed.
42