Miele PW 6065 manual Optimize energy Pre-rinse Cottons, No. rinses Cottons, No. rinses min. iron

Page 70

Settings - Supervisor level

Optimize energy

Pre-rinse Cottons

The energy use for the programs "Cottons Hygiene", "Cottons Uni." and "Minimum iron" is at its optimum when this option is turned on.

The machine comes factory set with this option "on".

The programs "Cottons Hygiene" and "Cottons Uni." allows you to add a pre-rinse of the laundry.

The machine comes factory set with this option "off".

No. rinses Cottons

The programs "Cottons Hygiene" and "Cottons Uni." allow you to change the number of rinse cycles.

2 rinses (factory default)

3rinses

4rinses

5rinses

No. rinses min. iron

The program "Minimum iron" allows you to change the number of rinses.

2 rinses (factory default)

3rinses

4rinses

Pre-rinse Min. iron

The program "Minimum iron" allows a pre-rinse of the laundry.

The machine comes factory set with this option "off".

Spin free of charge

When operated by a coin mechanism, the program "Spin" can be activated free of charge.

The machine comes factory set with this option "off".

70

Image 70

Contents Operating manual Washer PW 6065 Plus Page Contents Contents Important Safety Instructions Technical SafetyUse Using accessories ChildrenGuide to the washer Control panelMain menu Display functionProgram selection possibility Menu Program selection Settings JBasic menu of a wash program Before using for the first time Sort the laundry Using the washerGeneral tips Select a program Load the washerCoin mechanism Too little detergent may cause Adding detergentToo much detergent may cause Starting a program At the end of a programTo change a program To cancel a programTo change a program Adding/removing laundry during a wash programMinimum iron 140F to 86F 60C to 30C Cottons Hygiene 203F to 158F 95C to 70CCottons Uni F to cold 60C to cold Delicates 140F to 86F 60C to 30CProgram guide Table linen 140F to 86F 60C to 30C Additional programsKitchen linen 203F to 140F 95C to 60C Curtains 104F to cold 40C to coldOuterwear 104F to cold 40C to cold Proofing 104F to 86F 40C to 30CHygiene Disinfection programsSluice 167F 75C or Sluice 149F 65C Program sequence Main wash Rinse SpinPre-rinse Special features in the program sequence Anti-creaseHigh Spin OuterwearRinse spin SpinSpin speed Without final spinPre-wash Accessing the sub-menu ExtrasOptions Starch StopIntensive Rinse StopWater plus Select the Delay Start time Delay StartSelect the sub-menu Delay Start Starting the Delay StartBasic menu FavoritesSelecting/Changing a Favorite Select a programSelecting a temperature Selecting the spin speedSaving a Favorite Assigning a direct select buttonWater softener DetergentWater hardness Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning the washer Cleaning and CareCleaning the detergent drawer Cleaning the inlet hose filters Cleaning the inlet hose filterCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Open the lint trap door Remove the toolMachines with a drain pump Open the drum door Machines with a drain valve Changing the light bulb Optional accessories After sales servicePC Update RepairsPage Installation Instructions Installation Front viewRear view Coin mechanism Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid HeightRemoving the shipping struts Installation siteInstallation Do not lift the washer by the drum doorPull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Cold water connection MaintenanceWater connection Extension hosesHot water connection Drain valve DrainageDrain pump Electrical connection For Canada onlyTechnical Data Disposal of the packing materials Help to protect the environmentDisposal of an old appliance Menu Settings J To adjust standard settings Selecting Settings Settings JOpening the menu Settings Leaving the Settings menuLanguage J Suds coolingBrightness Time of dayContrast Selecting the clockStandby Temperature unitNot in current prog. Factory default MemorySettings Supervisor level Entering the codeConfirming the code Intensive Water plus Sort languagesSupervisor level SavePre-wash water Auto load control Main wash waterRinse water Wash time Cottons Water level CottonsWater level Min. iron Pre-wash temp. CotSluice No. of programs DisinfectionHygiene Pre-wash Kitchen linenNo. rinses min. iron Optimize energy Pre-rinse CottonsNo. rinses Cottons Pre-rinse Min. ironNo detergent Leaving the Settings menuExternal dispenser Alteration rights reserved