Installation
Washer/ Dryer Stack | Installation on a base |
Height:
Stacking kit with pull out shelf 66 15/16" (1700 mm)
The Miele washing machine can be installed as part of a
Installation of the stacking kit must be performed by a Miele Service Technician.
Reinstallation of the machine lid
When reinstalling the appliance lid, check the firm fit of the cover at the rear bracket for a safe transport of the dryer.
The machine can be installed on an open or closed steel base, or on a concrete base. Concrete is recommended.
^Secure the two front feet of the washer with the supplied retaining clips when installing on a concrete base.
^Read the supplied Installation manual.
Coin mechanism
The dryer can be equipped with a coin mechanism*.
The reprogramming necessary for the coin mechanism must be done by a Miele Service Technician.
Empty the coin mechanism regularly. Coins or tokens may get jammed.
Do not install devices to auto- matically turn the washer off, e.g. a clock timer.
*Available from your Miele dealer or Miele.
48