Miele PW 6065 manual General problems with the washer

Page 36

Frequently asked questions

General problems with the washer

Issue

Possible cause

Solution

The washer shakes

– The four feet are not

– Level the machine (see

during the spin cycle.

resting evenly on the

Installation Instructions).

 

floor.

 

 

– The floor is not

– It is recommended that

 

properly reinforced.

the machine is installed

 

 

on a concrete base.

There are unusual

There is no fault. Lapping sounds at the beginning

sounds coming from

and end of the pump process are normal.

the drain pump.

 

 

Large residues of

The water pressure is too

– Check and clean the

detergent remain in the

low.

filters in the water inlet

dispenser drawer

 

hoses.

 

 

– Select the "Water plus"

 

 

Extra if desired.

 

Water softening

Clean the detergent

 

detergent additives tend

drawer. In the future add

 

to clump.

the detergent first and then

 

 

the water softener to the

 

 

compartment.

The fabric softener is

The siphon tube is either

Clean the siphon tube, see

not completely

incorrectly positioned or

"Cleaning and care-

dispensed or too much

clogged.

Cleaning the detergent

water remains in the

 

dispenser drawer".

compartment §.

 

 

The display shows a

A different language was

Select the desired

foreign language.

selected under

language. The flag symbol

 

"Settings-Language J".

leads you to the setting.

 

 

 

36

Image 36
Contents Operating manual Washer PW 6065 Plus Page Contents Contents Important Safety Instructions Technical SafetyUse Using accessories ChildrenGuide to the washer Control panelDisplay function Main menuProgram selection possibility Settings J Menu Program selectionBasic menu of a wash program Before using for the first time Using the washer Sort the laundryGeneral tips Load the washer Select a programCoin mechanism Adding detergent Too little detergent may causeToo much detergent may cause Starting a program At the end of a programTo cancel a program To change a programTo change a program Adding/removing laundry during a wash programCottons Hygiene 203F to 158F 95C to 70C Cottons Uni F to cold 60C to coldMinimum iron 140F to 86F 60C to 30C Delicates 140F to 86F 60C to 30CProgram guide Additional programs Kitchen linen 203F to 140F 95C to 60CTable linen 140F to 86F 60C to 30C Curtains 104F to cold 40C to coldOuterwear 104F to cold 40C to cold Proofing 104F to 86F 40C to 30CDisinfection programs HygieneSluice 167F 75C or Sluice 149F 65C Program sequence Main wash Rinse SpinSpecial features in the program sequence Anti-crease High SpinPre-rinse OuterwearSpin Spin speedRinse spin Without final spinAccessing the sub-menu Extras OptionsPre-wash Starch StopRinse Stop IntensiveWater plus Delay Start Select the sub-menu Delay StartSelect the Delay Start time Starting the Delay StartFavorites Selecting/Changing a FavoriteBasic menu Select a programSelecting a temperature Selecting the spin speedSaving a Favorite Assigning a direct select buttonDetergent Water hardnessWater softener Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Open the lint trap doorMachines with a drain pump Open the drum door Machines with a drain valve Changing the light bulb After sales service PC UpdateOptional accessories RepairsPage Installation Instructions Installation Front viewRear view Washer/ Dryer Stack Installation on a base Reinstallation of the machine lidCoin mechanism HeightInstallation site InstallationRemoving the shipping struts Do not lift the washer by the drum doorPull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Maintenance Water connectionCold water connection Extension hosesHot water connection Drainage Drain valveDrain pump Electrical connection For Canada onlyTechnical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings J To adjust standard settings Settings J Opening the menu SettingsSelecting Settings Leaving the Settings menuLanguage J Suds coolingTime of day ContrastBrightness Selecting the clockTemperature unit Not in current prog. Factory defaultStandby MemorySettings Supervisor level Entering the codeConfirming the code Sort languages Supervisor levelIntensive Water plus SaveAuto load control Main wash water Pre-wash waterRinse water Water level Cottons Water level Min. ironWash time Cottons Pre-wash temp. CotNo. of programs Disinfection HygieneSluice Pre-wash Kitchen linenOptimize energy Pre-rinse Cottons No. rinses CottonsNo. rinses min. iron Pre-rinse Min. ironLeaving the Settings menu No detergentExternal dispenser Alteration rights reserved