Instructions for use
Change Spin Speed / Select Rinse Hold
0
3
If necessary, change the spin speed for the final
spin / select RINSE HOLD (GEEN CENTR., SANS ESSOR.):
Press the button Spin speed/RINSE HOLD (GEEN CENTR., SANS ESSOR.) as often as necessary until the display for the required spin speed (or of RINSE HOLD/GEEN CENTR., SANS ESSOR.) lights up.
If RINSE HOLD (GEEN CENTR., SANS ESSOR.) is
selected, the washing remains in the last rinsing water and is not spun.
If you do not change the spin speed, the final spin is automatically adapted depending on the washing program:
– COTTONS/LINEN | 1600 revolutions |
(WITTE/BONTE WAS, BLANC/COULEURS) | per minute |
– | 900 revolutions |
(KREUKHERSTELLEND, DEFROISSABLE/ | per minute |
STRIJKVRIJ, SANS REPASSAGE) |
|
– DELICATES | 700 revolutions |
(FIJNE WAS, LINGE DELICAT) | per minute |
– WOOLLENS (WOL, LAINE)/P (Handwash) | 900 revolutions |
| per minute |
The speed of the intermediate spin depends on the selected program and cannot be changed.
Set the Delay Timer/Soaking Duration
Delay Timer
The button DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) allows the start of a washing program to be advanced by 1 to a maximum of
19 hours.
0 To do this, press the button DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) as often as necessary until the required start delay is
shown in the multidisplay, e. g.12h in the form for a program start delay of 12 hours.
If19h is shown and you press again, 0h and afterwards the run time of the set washing program appears (display in minutes, e. g.129). In this state, the delay timer is not set.
20