AEG 76730 manual Water Inflow

Page 49

Setting up and connection instructions

Water Inflow

A pressure hose 1.5m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible.

Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua-Control.

Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with Aqua-Control.

Attention! Never cut into pieces in order to extend the hoses!

3

Sealing rings are supplied either in the plastic

 

nuts of the hose screw connection or in the

enclosed pack. Do not use other seals!

0 1. Connect the hose with the angled connection to the machine.

Attention!

– Do not lay the supply hose vertically downwards. Rather, turn it to the right or left as shown in the diagram.

– Only tighten the screw connection manually.

2. Connect the hose with the

straight connection to a water tap with a screw thread of R 3/4 (inches).

Attention! Only tighten the screw connection manually.

3. By slowly opening the water tap before putting the washing machine into operation, check whether the connection is free of leaks.

49

Image 49
Contents ÖKO-LAVAMAT 76730 update Dear customer Contents What to do if Remedying FaultsContents Before Putting into Operation for the First Time SafetyCorrect Use General Safety Child SafetyEnvironment Tips DisposalDispose the packing material Dispose the old applianceFront View Unit DescriptionDrawer for Washing Powder and Care Agent Program Selector Control PanelMain washing cycle Cottons/Linen at 30 C to 95 C Time cannot be combined with Quick WASH/KORT/COURTWoollens WOL, LAINE/P Handwash Shorter washing cycle for slightly dirty washing Additional Program ButtonsEffect Consumption Values and Time Requirements Water Protection Aqua Control What Does Update Mean?Prepare the Washing Cycle Before the First WashSort and Prepare the Washing Washing Types and Care Codes Water Softener How much washing detergent and care agent?Brief Instructions Run a Washing CycleAfter the Washing Program Ends Press the button again to deselect Set the Washing ProgramChange Spin Speed / Select Rinse Hold Set the Delay Timer/Soaking DurationPer minute HoursPre-wash time of approx minutes Soaking Duration= displayed value WAS, PRELAV. lights up on the program sequence displayAdd the Washing Opening and Closing the Filling DoorAdd Washing Detergent/Care Agent If using Liquid Detergent/TabsCompartment for pre-wash agent/soaking agent Or for water softenerSTART/PAUSE, MARCHE/PAUSE is pressed Start the Washing ProgramIf the time preselection is set Program Sequence Display Completion of the Washing ProgramMulti-Display Changing or aborting a program Changing a Washing ProgramSelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Washing Program TablesEASY-CARES PRE Wash Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsRINCAGE+ flashes Water Sans Repassage Washing detergent If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution PumpMachine and pull out the mains plug Out Emergency EmptyingEmergency Unlocking of the Filling Door Additional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancel Additional RinseSet Additional Rinse Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection InstructionsRemove the Transport Safeguard Setting Up the UnitWhen transporting the unit with a sack trolley Transporting the UnitClose off the hole with the plug cap G Firmly pull both hose holders off the unitSetting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Measurements in mmPage Page Index When do you incur costs even during the warranty period? Service
Related manuals
Manual 56 pages 1.75 Kb