Instructions for use
When all the washing solution has drained off:
6.Firmly push the plug into the emergency emptying hose and turn it tight clockwise.
7.Put the emergency emptying hose back into the holder.
8.Insert the flap into the base panel and close.
Clean the Solution Pump
1 | Warning! Before cleaning the solution pump, switch off the washing |
| machine and pull out the mains plug! |
0 1. | First carry out an emergency emptying (see the above section ”Carry |
| Out Emergency Emptying”). |
2.Place a wiping cloth on the floor in front of the cover of the solution pump. Residual water can run out.
3. Unscrew the solution pump cover anti- clockwise and pull it out.
4. Remove any foregin bodies from the pump housing.
5. Replace the cover. Insert the webs on the cover laterally into the guide slots and screw the cover firmly into place clockwise.
6. Close the emergency emptying hose and place it in the holder.
7. Close the flap.
39