Instructions for use
Run a Washing Cycle
Brief Instructions
A washing cycle is run in the following steps:
0 1. Set the correct washing program:
–Set the program and temperature with the program selector
–Set any additional program(s)
2.Change the spin speed if necessary / select RINSE HOLD (GEEN CENTR., SANS ESSOR.).
3.Set DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) if necessary.
4.Open the filling door and fill with washing.
5.Close the filling door.
6.Add washing detergent/care agent.
7.Start the washing program.
After the Washing Program Ends:
Attention! If the washing cycle ended with Rinse Hold, before opening the filling door carry out PUMP (POMPEN, VIDANGE), SPIN (CEN- TRIFUG., ESSORAGE) or SHORT SPIN (KORT CENTRIFUG., ESSOR. DELI- CAT).
8.Open the filling door and remove the washing.
9.Switch off the washing machine: Set the program selector to OFF (UIT, ARRET).
18