AEG 76730 manual Setting UP and Connection Instructions, Safety Instructions for Installation

Page 43

Setting up and connection instructions

SETTING UP AND CONNECTION

INSTRUCTIONS

Safety Instructions for Installation

•Do not tilt the washing machine onto its front or onto its right side (looking from the front). Electrical components could get wet!

•Check the washing machine for transport damage. Never connect a damaged unit. Consult your supplier in the event of damage.

•Ensure that all parts of the transport safeguard have been removed and that the splash guard is fitted to the unit, see ”Removing the Transport Safeguard”. Otherwise, damage to the unit or to adjacent furniture could occur during spinning.

•Always insert the plug into a correctly installed PE socket.

•In the case of permanent installation: A permanent installation may only be made by an authorised specialist.

•Before putting the unit into operation, ensure that the rated voltage and current type shown on the unit's rating plate are the same as the mains voltage and current type at the installation location. The required electrical fuse is also shown on the rating plate.

•The mains cable may only be replaced by the Customer Service or by an authorised specialist.

43

Image 43

Contents ÖKO-LAVAMAT 76730 update Dear customer Contents What to do if Remedying FaultsContents Before Putting into Operation for the First Time SafetyCorrect Use General Safety Child SafetyDispose the old appliance DisposalEnvironment Tips Dispose the packing materialFront View Unit DescriptionDrawer for Washing Powder and Care Agent Time cannot be combined with Quick WASH/KORT/COURT Control PanelProgram Selector Main washing cycle Cottons/Linen at 30 C to 95 CWoollens WOL, LAINE/P Handwash Shorter washing cycle for slightly dirty washing Additional Program ButtonsEffect Consumption Values and Time Requirements Water Protection Aqua Control What Does Update Mean?Prepare the Washing Cycle Before the First WashSort and Prepare the Washing Washing Types and Care Codes Water Softener How much washing detergent and care agent?Brief Instructions Run a Washing CycleAfter the Washing Program Ends Press the button again to deselect Set the Washing ProgramHours Set the Delay Timer/Soaking DurationChange Spin Speed / Select Rinse Hold Per minuteWAS, PRELAV. lights up on the program sequence display Soaking DurationPre-wash time of approx minutes = displayed valueAdd the Washing Opening and Closing the Filling DoorOr for water softener If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Compartment for pre-wash agent/soaking agentSTART/PAUSE, MARCHE/PAUSE is pressed Start the Washing ProgramIf the time preselection is set Program Sequence Display Completion of the Washing ProgramMulti-Display Change the Spin Speed Changing a Washing ProgramChanging or aborting a program Select the Additional ProgramWashing Cycle Ended/Remove Washing Washing Program TablesEASY-CARES PRE Wash Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsRINCAGE+ flashes Water Sans Repassage Washing detergent If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washingCarry Out an Emergency Emptying Operation Out Emergency Emptying Clean the Solution PumpWhen all the washing solution has drained off Machine and pull out the mains plugEmergency Unlocking of the Filling Door Additional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancel Additional RinseSet Additional Rinse Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection InstructionsTransporting the Unit Setting Up the UnitRemove the Transport Safeguard When transporting the unit with a sack trolleyClose off the hole with the plug cap G Firmly pull both hose holders off the unitSetting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Measurements in mm Technical DataDimensions Delivery Heads over 1mPage Page Index When do you incur costs even during the warranty period? Service

Related manuals

Manual 56 pages 1.75 Kb