AEG 76730 manual Electrical Connection, Water Connection, Permissible Water Pressure

Page 48

Setting up and connection instructions

Electrical Connection

Refer to the rating plate for details of the mains voltage, current type and the necessary fuses. The rating plate is located at the top behind the filling door.

; This unit conforms to the following EU directives:

–the ”Low Voltage Directive" 73/23/EU with changes

–the ”EMC Directive" 89/336/EWG with changes

Water Connection

3	The washing machine has safety features which prevent contamination
	of the drinking water and which conform to the legal regulations of

the water authorities (e.g. for Germany: DVGW regulations). Other pro- tection measures in the installation are therefore not necessary.

Attention!

– Units for connection to cold water must not be connected to hot water!

– Use only new sets of hoses for connection!

Permissible Water Pressure

The water pressure must be at least 1bar (= 10N/cm2 = 0.1MPa), maxi- mum 10bar (= 100N/cm2 = 1MPa).

•In the case of more than 10bar: Connect a pressure-reducing valve upstream.

•In the case of less than 1bar: Unscrew the intake hose on the unit side on the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with pointed pliers and remove the rubber washer behind). Replace the filter.

48

Image 48

Contents ÖKO-LAVAMAT 76730 update Dear customer Contents Remedying Faults What to do ifContents Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General SafetyDisposal Environment TipsDispose the packing material Dispose the old applianceUnit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program SelectorMain washing cycle Cottons/Linen at 30 C to 95 C Time cannot be combined with Quick WASH/KORT/COURTWoollens WOL, LAINE/P Handwash Additional Program Buttons Shorter washing cycle for slightly dirty washingEffect Consumption Values and Time Requirements What Does Update Mean? Water Protection Aqua ControlBefore the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerRun a Washing Cycle Brief InstructionsAfter the Washing Program Ends Set the Washing Program Press the button again to deselectSet the Delay Timer/Soaking Duration Change Spin Speed / Select Rinse HoldPer minute HoursSoaking Duration Pre-wash time of approx minutes= displayed value WAS, PRELAV. lights up on the program sequence displayOpening and Closing the Filling Door Add the WashingIf using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent/soaking agent Or for water softenerStart the Washing Program START/PAUSE, MARCHE/PAUSE is pressedIf the time preselection is set Completion of the Washing Program Program Sequence DisplayMulti-Display Changing a Washing Program Changing or aborting a programSelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingEASY-CARES PRE Wash Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifRINCAGE+ flashes Water Sans Repassage Washing detergent If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained offMachine and pull out the mains plug Out Emergency EmptyingEmergency Unlocking of the Filling Door Cancel Additional Rinse Additional Rinse RINSE+/SPOELEN+/RINCAGE+Set Additional Rinse Child Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Close off the hole with the plug cap GPrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Measurements in mmPage Page Index Service When do you incur costs even during the warranty period?

Related manuals

Manual 56 pages 1.75 Kb