Instructions for use
| Soaking Duration |
| With the SOAKING (INWEKEN, TREMPAGE) button pressed, you can |
| extend the soaking duration with the button DELAY TIMER (STARTTIJD- |
| KEUZE, DEPART DIFFERE) (maximum 10 hours and approx. 20 min.). |
3 | Without delay timer, the soaking duration is approx. 30 minutes, plus a |
|
|
0To set, press the button DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) as often as necessary until the required soaking duration is shown in the multidisplay, e.g.1h (= 1 hour).
After approx. 2 seconds, the multidisplay shows the run time in minutes.
This run time is comprised as follows:
| selected soaking period | e.g. | 1h =60 minutes |
| + heating up/prewash period | e.g. | approx. 20 minutes |
| + run time of the selected washing program e.g. | approx. 129 minutes | |
| = displayed value | e.g. | approx. 209 minutes |
3 | While SOAKING (INWEKEN, TREMPAGE) is running, PRE WASH (VOOR- | ||
| WAS, PRELAV.) lights up on the program sequence display. |
21