Operating Instructions
Run a washing cycle
Brief instructions
A washing cycle is run in the following steps:
01. Set the correct washing program:
–Set the program and temperature with the program selector.
–Set any additional program(s).
2.If necessary, change the spin speed/select RINSE HOLD.
3.Set the DELAY TIMER if necessary.
4.Open the filling door and fill with washing.
5.Close the filling door.
6.Add the detergent/care agent.
7.Start the washing program with the START/PAUSE button.
After the washing program ends:
Important! If the washing cycle ended with a rinse hold, perform PUMP OUT), SPIN or SHORT SPIN before opening the filling door.
8.Open the filling door and remove the washing.
9.Switch off the washing machine: Set the program selector to OFF.
19