Operating Instructions
Problem | Possible Cause | Remedy | |
| The screw connection on the | Tighten the intake hose | |
| intake hose is leaky. | screw connection. | |
| The drainage hose is leaky. | Check the drainage hose and | |
| replace it if necessary. | ||
|
| ||
| The drain pump cover is not | Close cover correctly. | |
| correctly closed. | ||
|
| ||
Water runs out under | Washing in caught in the | Abort program, remove | |
washing from the filling | |||
the washing machine. | filling door. | ||
door. Restart the program. | |||
|
| ||
|
| Close the emergency drain- | |
|
| age hose correctly (see the | |
| The emergency drainage | section "Carry out emer- | |
| hose is not correctly closed | gency drainage"). Call Cus- | |
| or leaks. | tomer Service if the | |
|
| emergency drainage hose | |
|
| leaks. | |
The drain pump for the |
|
| |
| Turn off the tap, then re- | ||
washing machine runs |
| ||
The Aqua Control | move the plug from the | ||
constantly - even when | |||
the appliance is | system has been activated. | mains and inform Customer | |
| Service. | ||
switched off. |
| ||
|
| ||
Conditioner was not | The conditioner insert in the |
| |
washed in, compart- | Clean the detergent drawer, | ||
compartment for care agents | |||
ment æ for care | attach the conditioner insert | ||
agents is filled with | is not correctly attached or | securely. | |
is blocked. | |||
water. |
| ||
|
| ||
|
| Pay attention to the maxi- | |
Washing heavily | Too mush washing probably | mum filling quantity (see | |
Program tables). In the case | |||
creased. | put in. | ||
of | |||
|
| ||
|
| the program EASY IRON. | |
The washing has not | The washing was not able to | Always load the drum | |
as ful as possible with a com- | |||
been spun as dry as | be distributed evenly in the | ||
bination of large and small | |||
usual. | drum prior to spinning. | ||
items. | |||
|
| ||
|
|
|
34