Operating Instructions
Changing the spin speed/Selecting the rinse hold function
| If required, change the spin speed for the final | ||
| spin/select rinse hold: |
|
|
| Changing the spin speed |
|
|
0 | Press the spin speed/RINSE HOLD button as often | ||
| as necessary, until the indicator for the desired spin | ||
| speed is illuminated. |
|
|
|
|
| |
3 | If you do not change the spin speed, the final spin | ||
| will be adjusted automatically depending on the | ||
| type of wash cycle: |
|
|
| – COTTONS/LINEN | 1600 revolutions per minute | |
| – EASY CARES/EASY IRON | 1200 revolutions per minute | |
| – DELICATES | 1200 revolutions per minute | |
| – WOOL/SILK /P (Hand Wash) | 1200 revolutions per minute |
The speed for the intermediate spin cycle is dependent on the wash cy- cle selected and cannot be altered.
Selecting the rinse hold function
0Press the spin speed/RINSE HOLD button as often as necessary, until the RINSE HOLD indicator is illuminated.
3 | If RINSE HOLD is selected, the washing will remain in the final rinse wa- | ||
| ter and will not be spun. | ||
Set the Delay Timer/Soaking Duration | |||
| Delay Timer | ||
| The button DELAY TIMER allows the start of a washing program to be | ||
| advanced by 1 to a maximum of 19 hours. | ||
0 | To do this, press the button DELAY TIMER as | ||
| often as necessary until the required start de- |
|
|
|
| ||
|
| ||
| lay is shown in the multidisplay, e.g.12h for a |
program start delay of 12 hours.
If19h is shown and you press again the run time of the set washing program appears (display in minutes, e.g.120).
In this state, the delay timer is not set.
21