AEG 76760 manual If the power supply is interrupted

Page 27

Operating Instructions

01. To do this, press the START/PAUSE button.

The door can now be opened and the washing removed.

2.Finally, turn the programme selector to OFF. The wash programme is complete.

3	If the display OVER DOSING lights up, too much

	washing detergent was used in the washing program
	just ended. During the next wash, pay attention to
	the dosing information of the washing detergent
	manufacturer and pay attention to the filling quantity!
	Attention! If the washing machine is not used for a long time:
	Close the water tap and disconnect the washing machine from the
	electricity mains. (The Aqua Control water protection does not function
	if the power supply is interrupted).

Image 27

Contents ÖKO-LAVAMAT 76760 update Pass it on to any future owners of the unit Tips on using the applianceDear Customer Please read this user information carefullyContents Program tables What to do ifWarranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use General Safety Safety of Children and Infirm PersonsDisposal Disposing of the Packaging MaterialDisposing of your old appliance Environmental tips Unit description Front viewDrawer for detergent and care agent Program Selector Control panelWOOL/SILK/ P Handwash Additional program buttons Consumption values Running time displayLoad Water Energy What does Update mean? Water Protection Aqua ControlBefore the First Wash Sort washing and prepare Prepare washing cycleTypes of Washing and Care Symbols How much washing detergent and care agent? Water softenerWater hardness details Run a washing cycle Brief instructionsAfter the washing program ends Tables Setting the Washing ProgramChanging the spin speed Set the Delay Timer/Soaking DurationDelay Timer Changing the spin speed/Selecting the rinse hold functionFor the maximum filling quantities, see the Program tables Soaking DurationOpening and Closing the Filling Door Add the washingOr for water softener If using liquid detergent / tabletsAdd Washing Detergent/Care Agent Compartment for pre-wash agent/soaking agentIf the delay timer has been set Starting the washing programIs pressed Change the Spin Speed Completion of the Washing ProgramProgram sequence display Multi-displayIf the Easy Iron programme was selected When a wash programme is completeWash cycle complete/removing the washing If Rinse Hold was selectedIf the power supply is interrupted Washing Program tablesType of washing Max. Filling quantity Program selector Separate conditioning/starching/impregnationSeparate rinse Separate spinDetergent Drawer Cleaning and CareMain door Washing DrumRemedying Faults Problem Possible Cause RemedyWhat to do if Water tap closed Open the water tap Water is not running Tighten the intake hose Drainage hose bent Remove the bend Maximum pumping height If there are white remnants on the washing If the washing results are not satisfactoryIf there are still grey spots on the washing If at the end of the last rinse foam is still visibleCarrying out emergency drainage Ing pumped out, e.g. if the pump is blocked When the water is completely drainedBefore cleaning the drain pump Drain pumpOperating Instructions Cancel additional rinse Additional rinsing cycle RINSE+Set additional rinse Disabling the water cooling function Water CoolingAdditional Rinse and Water Cooling Enabling the water cooling functionChild Safety Feature Setting the child safety featureCancelling the child safety Feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the applianceCover the hole with the cap C Are supplied with itPrepare the installation place Installation on a concrete baseInstallation on vibrating floors Compensate for floor unevenness Electrical connection Water connectionPermissible water pressure Water inflow Water drain-off inside a basin Water drainDelivery heads over 1m Water drain-off inside a siphon= 0.1 1.0 Mpa Technical dataDimensions Dimensions in mmOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandCyprus Lebanon Oman Australia Korea South NamibiaCroatia New Zealand Bulgaria Kuwait/Arabian GulfHungary Israel Malaysia Saudi ArabiaJapan Singapore Slovenia Thailand Slovakia Rep South AfricaPage Page Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

if the power supply is interrupted).