AEG 76760 manual Delivery heads over 1m, Water drain-off inside a siphon

Page 50

Installation and connection instructions

Water drain

The drainage hose can either be connected to a siphon or hung in a wash basin or discharge basin or a bath tub.

Only original hoses may be used for extensions (max. 3m laid on the floor and then up to 80cm high). Customer Service stocks drainage hoses in lengths of 2.7 and 4m.

Important! It is essential to lay the drainage hose without kinks.

Water drain-off inside a siphon

The grommet on the hose end fits all standard siphon types.

0 Secure the connection between the grommet and siphon with a hose clamp.

Water drain-off inside a basin

Important!

Small basins are not suitable for drainage. Water could overflow!

The end of the drainage hose must not

be submerged in the pumped-out wa- ter. Otherwise, the water could be sucked back into the unit.

When hanging in a wash basin or a

bath tub, the drainage hose must be secured with the supplied attachable bend to prevent it slipping. The back- surge force of the escaping water could otherwise force the hose out of the basin.

0 Tie the bend to the tap or the wall using a piece of string.

Delivery heads over 1m

To pump off the washing / rinsing solution, every washing machine has a drain pump which carries liquids up to a height of 1m via the drain- age hose, calculated from the machine's standing surface.

Please contact Customer Service for delivery heads of over 1m.

50

Image 50
Contents ÖKO-LAVAMAT 76760 update Please read this user information carefully Tips on using the applianceDear Customer Pass it on to any future owners of the unitContents What to do if Program tablesWarranty conditions / Customer service centres Correct Use SafetyBefore Using for the First Time Safety of Children and Infirm Persons General SafetyDisposing of your old appliance DisposalDisposing of the Packaging Material Environmental tips Drawer for detergent and care agent Unit descriptionFront view Control panel Program SelectorWOOL/SILK/ P Handwash Additional program buttons Load Water Energy Consumption valuesRunning time display Before the First Wash What does Update mean?Water Protection Aqua Control Prepare washing cycle Sort washing and prepareTypes of Washing and Care Symbols Water hardness details How much washing detergent and care agent?Water softener After the washing program ends Run a washing cycleBrief instructions Setting the Washing Program TablesChanging the spin speed/Selecting the rinse hold function Set the Delay Timer/Soaking DurationDelay Timer Changing the spin speedAdd the washing Soaking DurationOpening and Closing the Filling Door For the maximum filling quantities, see the Program tablesCompartment for pre-wash agent/soaking agent If using liquid detergent / tabletsAdd Washing Detergent/Care Agent Or for water softenerIs pressed If the delay timer has been setStarting the washing program Multi-display Completion of the Washing ProgramProgram sequence display Change the Spin SpeedIf Rinse Hold was selected When a wash programme is completeWash cycle complete/removing the washing If the Easy Iron programme was selectedIf the power supply is interrupted Program tables WashingSeparate spin Separate conditioning/starching/impregnationSeparate rinse Type of washing Max. Filling quantity Program selectorCleaning and Care Detergent DrawerWashing Drum Main doorWhat to do if Remedying FaultsProblem Possible Cause Remedy Water tap closed Open the water tap Water is not running Tighten the intake hose Drainage hose bent Remove the bend Maximum pumping height If at the end of the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey spots on the washing If there are white remnants on the washingCarrying out emergency drainage Drain pump When the water is completely drainedBefore cleaning the drain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Set additional rinse Cancel additional rinseAdditional rinsing cycle RINSE+ Enabling the water cooling function Water CoolingAdditional Rinse and Water Cooling Disabling the water cooling functionCancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation on vibrating floors Prepare the installation placeInstallation on a concrete base Compensate for floor unevenness Permissible water pressure Electrical connectionWater connection Water inflow Water drain-off inside a siphon Water drainDelivery heads over 1m Water drain-off inside a basinDimensions in mm Technical dataDimensions = 0.1 1.0 MpaWeitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroBulgaria Kuwait/Arabian Gulf Australia Korea South NamibiaCroatia New Zealand Cyprus Lebanon OmanThailand Slovakia Rep South Africa Israel Malaysia Saudi ArabiaJapan Singapore Slovenia HungaryPage Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG