AEG 76760 manual What to do if, Remedying Faults, Problem Possible Cause Remedy

Page 32

Operating Instructions

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.

• If the fault code C1, C2 or Cd is shown in the multidisplay, you may be able to remedy the fault yourself (see Faults Table below). When you have remedied the fault, press the START/ PAUSE button.

•With all other displayed faults (C plus number or letter): switch appli-

ance off and on again. Reset the wash programme and press the START/PAUSE button.

If the fault code is displayed again, please contact the Customer Service department quoting the fault code.

	Problem	Possible Cause	Remedy
		The mains plug is not	Plug in the mains plug.
		plugged in.	Plug in the mains plug.
		plugged in.
		The fuse of the building's	Replace the fuse.
		wiring is not in order.	Replace the fuse.
	The washing machine	wiring is not in order.
	The washing machine	The filling door is not	Close the filling door; The
	does not work.	The filling door is not	Close the filling door; The
		correctly closed.	lock must engage audibly.
		Button START/PAUSE not	Press the button START/
		Button START/PAUSE not	PAUSE until the program
		pressed for long enough.	PAUSE until the program
		pressed for long enough.	starts.
			starts.
	The filling door cannot		Cancel the child safety fea-
	The filling door cannot	The child safety feature is set	ture (see Section "Child
	be closed.	The child safety feature is set	ture (see Section "Child
	be closed.		Safety Feature“).
			Safety Feature“).

	Error code Cd is shown
	in the multi-display.	The filling door is not	Close the filling door cor-
	The indicators	The filling door is not	Close the filling door cor-
	The indicators	correctly closed.	rectly. Restart the program.
	PRE WASH, RINSE and	correctly closed.	rectly. Restart the program.
	PRE WASH, RINSE and
	RINSE+ flash.

32

Image 32

Contents ÖKO-LAVAMAT 76760 update Tips on using the appliance Dear CustomerPlease read this user information carefully Pass it on to any future owners of the unitContents What to do if Program tablesWarranty conditions / Customer service centres Correct Use SafetyBefore Using for the First Time Safety of Children and Infirm Persons General SafetyDisposing of your old appliance DisposalDisposing of the Packaging Material Environmental tips Drawer for detergent and care agent Unit descriptionFront view Control panel Program SelectorWOOL/SILK/ P Handwash Additional program buttons Load Water Energy Consumption valuesRunning time display Before the First Wash What does Update mean?Water Protection Aqua Control Prepare washing cycle Sort washing and prepareTypes of Washing and Care Symbols Water hardness details How much washing detergent and care agent?Water softener After the washing program ends Run a washing cycleBrief instructions Setting the Washing Program TablesSet the Delay Timer/Soaking Duration Delay TimerChanging the spin speed/Selecting the rinse hold function Changing the spin speedSoaking Duration Opening and Closing the Filling DoorAdd the washing For the maximum filling quantities, see the Program tablesIf using liquid detergent / tablets Add Washing Detergent/Care AgentCompartment for pre-wash agent/soaking agent Or for water softenerIs pressed If the delay timer has been setStarting the washing program Completion of the Washing Program Program sequence displayMulti-display Change the Spin SpeedWhen a wash programme is complete Wash cycle complete/removing the washingIf Rinse Hold was selected If the Easy Iron programme was selectedIf the power supply is interrupted Program tables WashingSeparate conditioning/starching/impregnation Separate rinseSeparate spin Type of washing Max. Filling quantity Program selectorCleaning and Care Detergent DrawerWashing Drum Main doorWhat to do if Remedying FaultsProblem Possible Cause Remedy Water tap closed Open the water tap Water is not running Tighten the intake hose Drainage hose bent Remove the bend Maximum pumping height If the washing results are not satisfactory If there are still grey spots on the washingIf at the end of the last rinse foam is still visible If there are white remnants on the washingCarrying out emergency drainage When the water is completely drained Before cleaning the drain pumpDrain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Set additional rinse Cancel additional rinseAdditional rinsing cycle RINSE+ Water Cooling Additional Rinse and Water CoolingEnabling the water cooling function Disabling the water cooling functionCancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation and connection instructions Installation Safety PrecautionsInstallation of the appliance When transporting the unit with a sack trolleyTransporting the appliance Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation on vibrating floors Prepare the installation placeInstallation on a concrete base Compensate for floor unevenness Permissible water pressure Electrical connectionWater connection Water inflow Water drain Delivery heads over 1mWater drain-off inside a siphon Water drain-off inside a basinTechnical data DimensionsDimensions in mm = 0.1 1.0 MpaFurther after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroAustralia Korea South Namibia Croatia New ZealandBulgaria Kuwait/Arabian Gulf Cyprus Lebanon OmanIsrael Malaysia Saudi Arabia Japan Singapore SloveniaThailand Slovakia Rep South Africa HungaryPage Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG