AEG 76760 manual Starting the washing program, Is pressed, If the delay timer has been set

Page 24

Operating Instructions

Starting the washing program

01. Check that the water tap is open.

2.Start the washing program:

Press the START/PAUSE button

The washing program is started or starts at the end of the time delay set.

3	The door is not correctly closed if, when the button START/PAUSE
	is pressed,

– the error code Cd is shown in the multi-display and

– the indicators PRE WASH, RINSE and RINSE+ flash

In this case, press the door firmly closed and again press the START/PAUSE button.

If the delay timer has been set:

The start time delay set on the time delay counts down; the time remaining until the program starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer.

• Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again.

• Changing or stopping delay timer: Press the DELAY TIMER button re- peatedly until the desired time is displayed. When the program dura- tion is displayed (display in minutes e. g.120) the washing program starts without delay.

24

Image 24

Contents ÖKO-LAVAMAT 76760 update Tips on using the appliance Dear CustomerPlease read this user information carefully Pass it on to any future owners of the unitContents What to do if Program tablesWarranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use Safety of Children and Infirm Persons General SafetyDisposal Disposing of the Packaging MaterialDisposing of your old appliance Environmental tips Unit description Front viewDrawer for detergent and care agent Control panel Program SelectorWOOL/SILK/ P Handwash Additional program buttons Consumption values Running time displayLoad Water Energy What does Update mean? Water Protection Aqua ControlBefore the First Wash Prepare washing cycle Sort washing and prepareTypes of Washing and Care Symbols How much washing detergent and care agent? Water softenerWater hardness details Run a washing cycle Brief instructionsAfter the washing program ends Setting the Washing Program TablesSet the Delay Timer/Soaking Duration Delay TimerChanging the spin speed/Selecting the rinse hold function Changing the spin speedSoaking Duration Opening and Closing the Filling DoorAdd the washing For the maximum filling quantities, see the Program tablesIf using liquid detergent / tablets Add Washing Detergent/Care AgentCompartment for pre-wash agent/soaking agent Or for water softenerIf the delay timer has been set Starting the washing programIs pressed Completion of the Washing Program Program sequence displayMulti-display Change the Spin SpeedWhen a wash programme is complete Wash cycle complete/removing the washingIf Rinse Hold was selected If the Easy Iron programme was selectedIf the power supply is interrupted Program tables WashingSeparate conditioning/starching/impregnation Separate rinseSeparate spin Type of washing Max. Filling quantity Program selectorCleaning and Care Detergent DrawerWashing Drum Main doorRemedying Faults Problem Possible Cause RemedyWhat to do if Water tap closed Open the water tap Water is not running Tighten the intake hose Drainage hose bent Remove the bend Maximum pumping height If the washing results are not satisfactory If there are still grey spots on the washingIf at the end of the last rinse foam is still visible If there are white remnants on the washingCarrying out emergency drainage When the water is completely drained Before cleaning the drain pumpDrain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Cancel additional rinse Additional rinsing cycle RINSE+Set additional rinse Water Cooling Additional Rinse and Water CoolingEnabling the water cooling function Disabling the water cooling functionChild Safety Feature Setting the child safety featureCancelling the child safety Feature Installation and connection instructions Installation Safety PrecautionsInstallation of the appliance When transporting the unit with a sack trolleyTransporting the appliance Remove transport packagingAre supplied with it Cover the hole with the cap CPrepare the installation place Installation on a concrete baseInstallation on vibrating floors Compensate for floor unevenness Electrical connection Water connectionPermissible water pressure Water inflow Water drain Delivery heads over 1mWater drain-off inside a siphon Water drain-off inside a basinTechnical data DimensionsDimensions in mm = 0.1 1.0 MpaFurther after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroAustralia Korea South Namibia Croatia New ZealandBulgaria Kuwait/Arabian Gulf Cyprus Lebanon OmanIsrael Malaysia Saudi Arabia Japan Singapore SloveniaThailand Slovakia Rep South Africa HungaryPage Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG