AEG 76760 manual Drain pump, When the water is completely drained, Before cleaning the drain pump

Page 38

Operating Instructions

When the water is completely drained:

6.Push the plug securely into the emergency drainage hose and turn it clockwise to secure it.

7.Replace the emergency drainage hose in its holder.

8.Put on the flap and close.

Drain pump

 

The drain pump is maintenance free. The cover of the drain pump must

 

only opened in the event of a malfunction when no more water is be-

 

ing pumped out, e.g. if the pump is blocked.

 

Before loading the machine, please always ensure that there are no for-

 

eign objects left in the pockets or in between the items to be washed.

 

Paper clips, nails etc. which may find their way into the washing ma-

 

chine along with the washing will remain in the drain pump housing.

 

To restart the drain pump when it is blocked, please proceed as follows:

1

Warning! Switch off the washing machine and remove the mains plug

 

before cleaning the drain pump!

01. First carry out an emergency emptying procedure (see section “Carrying out emergency emptying”).

2.Place a cloth on the floor in front of the cover of the drain pump. Residual water may run out.

3. Unscrew the drain pump cover in an anti-clockwise direction and pull it out.

4. Remove any foreign objects and fabric lint from the pump housing.

38

Image 38
Contents ÖKO-LAVAMAT 76760 update Please read this user information carefully Tips on using the applianceDear Customer Pass it on to any future owners of the unitContents What to do if Program tablesWarranty conditions / Customer service centres Correct Use SafetyBefore Using for the First Time Safety of Children and Infirm Persons General SafetyDisposing of your old appliance DisposalDisposing of the Packaging Material Environmental tips Drawer for detergent and care agent Unit descriptionFront view Control panel Program SelectorWOOL/SILK/ P Handwash Additional program buttons Load Water Energy Consumption valuesRunning time display Before the First Wash What does Update mean?Water Protection Aqua Control Prepare washing cycle Sort washing and prepareTypes of Washing and Care Symbols Water hardness details How much washing detergent and care agent?Water softener After the washing program ends Run a washing cycleBrief instructions Setting the Washing Program TablesChanging the spin speed/Selecting the rinse hold function Set the Delay Timer/Soaking DurationDelay Timer Changing the spin speedAdd the washing Soaking DurationOpening and Closing the Filling Door For the maximum filling quantities, see the Program tablesCompartment for pre-wash agent/soaking agent If using liquid detergent / tabletsAdd Washing Detergent/Care Agent Or for water softenerIs pressed If the delay timer has been setStarting the washing program Multi-display Completion of the Washing ProgramProgram sequence display Change the Spin SpeedIf Rinse Hold was selected When a wash programme is completeWash cycle complete/removing the washing If the Easy Iron programme was selectedIf the power supply is interrupted Program tables WashingSeparate spin Separate conditioning/starching/impregnationSeparate rinse Type of washing Max. Filling quantity Program selectorCleaning and Care Detergent DrawerWashing Drum Main doorWhat to do if Remedying FaultsProblem Possible Cause Remedy Water tap closed Open the water tap Water is not running Tighten the intake hose Drainage hose bent Remove the bend Maximum pumping height If at the end of the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey spots on the washing If there are white remnants on the washingCarrying out emergency drainage Drain pump When the water is completely drainedBefore cleaning the drain pump Ing pumped out, e.g. if the pump is blockedOperating Instructions Set additional rinse Cancel additional rinseAdditional rinsing cycle RINSE+ Enabling the water cooling function Water CoolingAdditional Rinse and Water Cooling Disabling the water cooling functionCancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation on vibrating floors Prepare the installation placeInstallation on a concrete base Compensate for floor unevenness Permissible water pressure Electrical connectionWater connection Water inflow Water drain-off inside a siphon Water drainDelivery heads over 1m Water drain-off inside a basinDimensions in mm Technical dataDimensions = 0.1 1.0 MpaWeitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroBulgaria Kuwait/Arabian Gulf Australia Korea South NamibiaCroatia New Zealand Cyprus Lebanon OmanThailand Slovakia Rep South Africa Israel Malaysia Saudi ArabiaJapan Singapore Slovenia HungaryPage Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG