Installation and connection instructions
Compensate for floor unevenness
3 | Automatic adjustment foot: The rear left foot of your washing ma- |
| chine is designed as a spring leg. This means that it guarantees that |
your unit will stand securely even at high spin speeds.
If, nevertheless, the washing machine is unstable during spinning, please proceed as follows:
01. Set the three adjusted feet at the
nominal value of 10 mm. To do
this, use the supplied special spanner to remove the transport safeguard.
If the automatically adjusting
foot does not reach the floor:
2. Automatic adjustment foot (rear
left) manually for extending the reqired dimension.
3. If necessary, check the setting with a spirit level.
Caution! Never use wood, card or similar underlays to level out minor floor unevenness. Instead, always adjust the adjustment foot.
47