AEG 88830 manual What to do if, Remedying Faults

Page 33

Instructions for use

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.

•It the fault code C1 or C2 appears in the multi-display, you may be able to remedy the fault yourself (see the fault table

below). After remedying the fault, press the button START/PAUSE (MARCHE/PAUSE). If the fault code is displayed again, please inform the Customer Service.

•In the case of all other displayed faults (C and number or letter), please inform the Customer Service and state the fault code.

	Problem	Possible Cause	Remedy
		The mains plug is not	Plug in the mains plug.
		plugged in.	Plug in the mains plug.
		plugged in.
		The fuse of the building's	Replace the fuse.
		wiring is not in order.	Replace the fuse.
		wiring is not in order.
	The washing machine	The filling door is not	Close the filling door; The
	does not work.	The filling door is not	Close the filling door; The
	does not work.	correctly closed.	lock must engage audibly.
		correctly closed.	lock must engage audibly.
		The START/PAUSE	Press the START/PAUSE
		(MARCHE/PAUSE) button	Press the START/PAUSE
		(MARCHE/PAUSE) button	(MARCHE/PAUSE) button
		was not pressed long	(MARCHE/PAUSE) button
		was not pressed long	until the program starts.
		enough.	until the program starts.
		enough.
	The filling door cannot	The child safety feature is	Cancel the child safety
	The filling door cannot	The child safety feature is	feature (see Section "Child
	be closed.	set.	feature (see Section "Child
	be closed.	set.	Safety Feature“).
			Safety Feature“).
		Water valve closed.	Open the water valve.
	Water is not running.		Close the water valve.
	Water is not running.	Filter in screw connection of	Unscrew the hose from the
	Error code (1	the intake hose blocked.	tap, remove the sieve and
	appears.		clean under running water.
		Water valve. is blocked with	Check water valve. and have
		limescale or is faulty.	it repaired if necessary.

33

Image 33

Contents ÖKO-LAVAMAT 88830 update Dear customer Contents What to do if Solution CoolingContents Safety Before Putting into Operation for the First TimeCorrect Use General Safety Child SafetyEnvironment Tips DisposalDispose the packing material For polyoxymethylene, e.g. plastic clipsUnit Description Front ViewDrawer for Washing Powder and Care Agent Program Selector Control panelSilk SOIE/ P Handwash Program Wool LAINE/ P Handwash ProgramAdditional Program Buttons Consumption Values and Time Requirements Running Time Display Water Protection Aqua Control + Aqua Alarm What Does Update Mean?Before the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes Water Softener How much washing detergent and care agent?Run a Washing Cycle Brief InstructionsAfter the Washing Program Ends Setting the Washing Program Possible additional programs to suit the type of washingSet the program selector to Change the spin speed/Select rinse hold Set the delay timer/soaking duration Delay timerAdapted depending on the washing program COTTONS/LINEN BLANC/COULEURS 1800 revolutions per minuteSoaking duration Opening and closing the filling doorAdd the Washing Add Washing Detergent and/Care Agent If using Liquid Detergent/TabsSection Washing Detergents and Care Agents Or for water softenerStart the washing program If the delay timer is setProgram sequence display Completion of the Washing ProgramMulti-display Display Residual MOISTURE%/LOADING%Abort program Washing cycle is finished/Remove the washingIt again Program is finishedToo much detergent was used in the just finished Washing Program TablesSeparate Spin Separate Conditioning/Starching/ImpregnatingWashing Detergent Drawer Cleaning and CareFilling Door Washing DrumBefore cleaning the drain pump Cleaning the drain pumpPump Gency EmptyingWhat to do if Remedying FaultsNot been removed Turn off the tap, then Open the water valve fully If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Emergency Unlocking of the Filling Door When all the washing solution has drained offAdditional Rinse RINSE+ Set Additional RinseCancel Additional Rinse Solution CoolingTime Cycle before pumping off by incoming cold waterAdditional Rinse and Solution Cooling Set the Solution CoolingCancel the Solution Cooling Setting the Program Saving Function Canceling the Program Saving FunctionProgram Saving Setting the Child Safety Child Safety FeatureFeature Cancelling the Child Safety FeatureSafety Instructions for Installation Setting UP and Connection InstructionsRemove the Transport Safeguard Setting Up the UnitWhen transporting the unit with a sack trolley Transporting the UnitClose off the hole with the plug cap G Firmly pull both hose holders off the unitPrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Measurements in mmPage Index When do you incur costs even during the warranty period? Service