AEG 88830 manual Open the water valve fully

Page 36

Instructions for use

	Problem	Possible Cause	Remedy
		Water valve not fully opened.	Open the water valve fully.
	Remnants of detergent	Filter in the screw connec-	Close the water valve.
	are building up in the	Filter in the screw connec-	Close the water valve.
	are building up in the	tion of the intake hose on	Unscrew the intake hose
	detergent drawer.	tion of the intake hose on	Unscrew the intake hose
	detergent drawer.	the water valve or on the	from the water tap and from
		the water valve or on the	from the water tap and from
		unit is blocked.	the unit. Clean the filter.
	The rinsing water is	The cause is probably a	No negative influence on the
	The rinsing water is	detergent with a high silicate	rinsing result, possibly use
	murky.	detergent with a high silicate	rinsing result, possibly use
	murky.	content.	liquid detergent.
		content.	liquid detergent.
	No illumination when	The selected additional pro-
	pressing an additional	gram cannot be combined	Make another selection.
	program.	with the set program.
	Only the END (FIN)	The washing machine is in
	control panel label is	The washing machine is in	Press any button.
	control panel label is	the stand-by mode.	Press any button.
	illuminated.	the stand-by mode.
	illuminated.
	Only the RUN TIME
	(TEMPS RESTANT) con-
	trol panel is illumi-	The start time preselection is	If you press any button the
	nated, a number	counting, the washing	If you press any button the
	nated, a number	counting, the washing	machine will leave the
	between 1 and 19 is	machine is in the stand-by	machine will leave the
	between 1 and 19 is	machine is in the stand-by	stand-by mode.
	shown in the RUN TIME	mode.	stand-by mode.
	shown in the RUN TIME	mode.
	(TEMPS RESTANT) dis-
	play .
	The program sequence	Program saving switched on;	Turn the program selector
	The program sequence	the program selector was	Turn the program selector
	indicator flashes con-	the program selector was	back to the original position
	indicator flashes con-	accidentally readjusted dur-	back to the original position
	stantly.	accidentally readjusted dur-	(see "Program Saving“).
	stantly.	ing the washing cycle.	(see "Program Saving“).
		ing the washing cycle.

36

Image 36

Contents ÖKO-LAVAMAT 88830 update Dear customer Contents Solution Cooling What to do ifContents Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General SafetyDisposal Environment TipsDispose the packing material For polyoxymethylene, e.g. plastic clipsUnit Description Front ViewDrawer for Washing Powder and Care Agent Control panel Program SelectorWool LAINE/ P Handwash Program Silk SOIE/ P Handwash ProgramAdditional Program Buttons Consumption Values and Time Requirements Running Time Display What Does Update Mean? Water Protection Aqua Control + Aqua AlarmBefore the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerRun a Washing Cycle Brief InstructionsAfter the Washing Program Ends Setting the Washing Program Possible additional programs to suit the type of washingSet the program selector to Set the delay timer/soaking duration Delay timer Change the spin speed/Select rinse holdAdapted depending on the washing program COTTONS/LINEN BLANC/COULEURS 1800 revolutions per minuteSoaking duration Opening and closing the filling doorAdd the Washing If using Liquid Detergent/Tabs Add Washing Detergent and/Care AgentSection Washing Detergents and Care Agents Or for water softenerIf the delay timer is set Start the washing programCompletion of the Washing Program Program sequence displayMulti-display Display Residual MOISTURE%/LOADING%Washing cycle is finished/Remove the washing Abort programIt again Program is finishedToo much detergent was used in the just finished Program Tables WashingSeparate Conditioning/Starching/Impregnating Separate SpinCleaning and Care Washing Detergent DrawerWashing Drum Filling DoorCleaning the drain pump Before cleaning the drain pumpPump Gency EmptyingRemedying Faults What to do ifNot been removed Turn off the tap, then Open the water valve fully If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Emergency Unlocking of the Filling DoorAdditional Rinse RINSE+ Set Additional RinseSolution Cooling Cancel Additional RinseTime Cycle before pumping off by incoming cold waterAdditional Rinse and Solution Cooling Set the Solution CoolingCancel the Solution Cooling Setting the Program Saving Function Canceling the Program Saving FunctionProgram Saving Child Safety Feature Setting the Child SafetyFeature Cancelling the Child Safety FeatureSetting UP and Connection Instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Close off the hole with the plug cap GPrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Measurements in mmPage Index Service When do you incur costs even during the warranty period?