AEG 88830 manual Not been removed

Page 34

Instructions for use

Problem

Possible Cause

Remedy

 

The transport packaging has

Remove transport packaging

 

according to the installation

 

not been removed.

 

and connection instructions.

 

 

 

The height-adjustable screw

Adjust in accordance with

 

the installation and connec-

 

feet are not correctly set.

 

tion instructions.

 

 

The washing machine

There is not much washing in

This does not impair the

vibrates during opera-

the drum (e.g. only one

tion or it is on an une-

function.

dressing gown).

ven surface.

 

 

 

 

 

Check the laying of the

 

The water could not be com-

drainage hose and eliminate

 

pletely pumped off before

the bend if necessary, or

 

spinning because

clean the solution pump and,

 

the drainage hose is bent or

if required, remove foreign

 

the solution pump is blocked.

bodies from the pump

 

 

housing.

The washing solution

Probably too much detergent

Meter the detergent exactly

of the main wash

in accordance with the man-

was used.

froths up a lot.

ufacturer's information.

 

 

 

 

 

The screw connection on the

Tighten the intake hose

 

intake hose is leaky.

screw connection.

 

The drainage hose is leaky.

Check the drainage hose and

 

replace it if necessary.

 

 

 

The washing solution pump

Close cover correctly.

 

cover is not correctly closed.

 

 

Water is flowing out

 

Abort the program, remove

from beneath the

Washing in caught in the

washing from the door and

washing machine .

filling door.

start a new program.

 

 

 

 

Shut the emergency drain

 

The emergency drain hose is

hose off properly (see section

 

"Performing an Emergency

 

not properly shut off or it is

 

Drain"). Call your after-sales

 

not water-tight.

 

service if the emergency

 

 

 

 

drain hose is not water-tight.

 

 

 

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents ÖKO-LAVAMAT 88830 update Dear customer Contents Solution Cooling What to do ifContents Before Putting into Operation for the First Time SafetyCorrect Use Child Safety General SafetyDispose the packing material DisposalEnvironment Tips For polyoxymethylene, e.g. plastic clipsFront View Unit DescriptionDrawer for Washing Powder and Care Agent Control panel Program SelectorWool LAINE/ P Handwash Program Silk SOIE/ P Handwash ProgramAdditional Program Buttons Consumption Values and Time Requirements Running Time Display What Does Update Mean? Water Protection Aqua Control + Aqua AlarmPrepare the Washing Cycle Before the First WashSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerBrief Instructions Run a Washing CycleAfter the Washing Program Ends Possible additional programs to suit the type of washing Setting the Washing ProgramSet the program selector to Adapted depending on the washing program Set the delay timer/soaking duration Delay timerChange the spin speed/Select rinse hold COTTONS/LINEN BLANC/COULEURS 1800 revolutions per minuteOpening and closing the filling door Soaking durationAdd the Washing Section Washing Detergents and Care Agents If using Liquid Detergent/TabsAdd Washing Detergent and/Care Agent Or for water softenerIf the delay timer is set Start the washing programMulti-display Completion of the Washing ProgramProgram sequence display Display Residual MOISTURE%/LOADING%It again Washing cycle is finished/Remove the washingAbort program Program is finishedToo much detergent was used in the just finished Program Tables WashingSeparate Conditioning/Starching/Impregnating Separate SpinCleaning and Care Washing Detergent DrawerWashing Drum Filling DoorPump Cleaning the drain pumpBefore cleaning the drain pump Gency EmptyingRemedying Faults What to do ifNot been removed Turn off the tap, then Open the water valve fully If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Additional Rinse RINSE+ When all the washing solution has drained offEmergency Unlocking of the Filling Door Set Additional RinseTime Solution CoolingCancel Additional Rinse Cycle before pumping off by incoming cold waterSet the Solution Cooling Additional Rinse and Solution CoolingCancel the Solution Cooling Canceling the Program Saving Function Setting the Program Saving FunctionProgram Saving Feature Child Safety FeatureSetting the Child Safety Cancelling the Child Safety FeatureSetting UP and Connection Instructions Safety Instructions for InstallationWhen transporting the unit with a sack trolley Setting Up the UnitRemove the Transport Safeguard Transporting the UnitFirmly pull both hose holders off the unit Close off the hole with the plug cap GSetting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Delivery Heads over 1m Technical DataDimensions Measurements in mmPage Index Service When do you incur costs even during the warranty period?
Top Page Image Contents