AEG 70630 manual Additional program buttons

Page 12

Operating Instructions

 

Additional program buttons

 

The additional program buttons are for adapting

 

the washing program to the dirtiness of the

 

washing. Additional programs are not required for

 

washing which is not excessively dirty.

 

Various functions can be combined with each

 

other, depending on the program.

 

PRE WASH

 

Cold pre wash before the main washing cycle

 

which follows on automatically. with intermediate

 

spin at COTTONS/LINEN, without intermediate

 

spinning in the case of EASY CARES and DELI-

 

CATES.

 

SOAKING

 

Approx. 1 hour at 30 °C or 40 °C, depending on the set program. Can be

 

extended with the button DELAY TIMER by max. 19 hours. This is fol-

 

lowed by the main washing cycle.

 

QUICK WASH

 

Shortened washing cycle for slightly dirty washing.

 

STAIN

 

For treating very dirty washing or stained washing. (In-wash stain

 

treatment is added during the program on a time-optimized basis)

3

With the setting WOOL / P (Hand wash) it is not possible to select the

 

additional programs (any buttons pressed have no effect).

12

Image 12
Contents ÖKO-LAVAMAT 70630 update Dear Customer Contents Installation and connection instructions Warranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use Child Safety General SafetyDisposal Environmental tipsDisposing of the Packaging Material Disposing of your old applianceUnit description Front viewDrawer for detergent and care agent Control panel Program SelectorWOOL/P Handwash Additional program buttons Water Energy Time Temperature Running time displayProgram Selector What does Update mean? Before the First WashPrepare washing cycle Sort washing and prepareWashing Types and Care Codes How much washing detergent and care agent? Water softenerWater hardness details Run a Washing Cycle Brief InstructionsAfter the Washing Program Ends Setting the Washing Program TablesSet the delay timer/soaking duration Delay timerChange Spin Speed / Select Rinse Hold Soaking durationIndicator Door Indicator START/PAUSE Opening and Closing the Filling DoorAdd the washing For the maximum filling quantities, see the Program tablesIf using liquid detergent / tablets Add Washing Detergent/Care AgentSection Washing Detergents and Care Agents If the delay timer has been set Starting the washing programIs pressed Completion of the Washing Program Program sequence displayMulti-display Change the Spin SpeedWashing cycle is finished/Remove the washing If the display Over Dosing lights up, too muchCare Codes Temperature Program TablesWashing Type of Washing MaxSeparate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Type of WashingCleaning and Care Detergent DrawerWashing Drum Main doorCleaning the drain pump Before cleaning the drain pumpGency emptying Remedying faults Problem Possible Cause RemedyWhat to do if Water tap closed Open the water tap Water is not running Replace it if necessary Tor lights up green If the washing results are not satisfactory If there are still grey spots on the washingIf at the end of the last rinse foam is still visible If there are white remnants on the washingCarrying out emergency drainage When the water is completely drained Cancel additional rinse Additional rinsing cycle RINSE+Set additional rinse Child Safety Feature Cancelling the child safety featureCan be started On the inside of the filling doorInstallation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transportation protection Under unitsClose the hole with the cap G Inside of the unit against splash waterPrepare the installation place Installation on a concrete baseInstallation on vibrating floors Pensated for by adjusting the adjustable feet Compensate for floor unevennessDed foot as far as it will go Electrical connection Water connectionPermissible water pressure Water inflow Tie the bend to the tap or the wall using a piece of string Water drainWater drain-off inside a basin Technical data DimensionsDimensions in mm Delivery heads over 1mFurther after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCroatia New Zealand Bulgaria Kuwait/Arabian GulfCyprus Lebanon Oman Estonia Latavia PolandIsrael Malaysia Saudi Arabia Japan Singapore SloveniaThailand Slovakia Rep South Africa HungaryPage Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG