AEG 70630 manual Water tap closed Open the water tap Water is not running

Page 32

Operating Instructions

Problem

Possible Cause

Remedy

 

Water tap closed.

Open the water tap.

Water is not running.

 

Close the water tap. Unscrew

Filter in screw connection of

the hose from the tap, re-

Error code (1 is shown

the intake hose blocked.

move the sieve and clean un-

in the multi-display.

 

der running water

 

Water tap is blocked with

Check water tap and have it

 

limescale or is faulty.

repaired if necessary.

 

The transport packaging has

Remove transport packaging

 

according to the installation

 

not been removed.

 

and connection instructions.

 

 

 

The height-adjustable screw

Adjust the feet in accordance

 

with the installation and

 

feet are not correctly set.

 

connection instructions.

 

 

The washing machine

There is not much washing in

This does not impair the

vibrates during opera-

the drum (e.g. only one

tion or it is on an une-

function.

dressing gown).

ven surface.

 

 

 

 

 

Check the laying of the

 

The water could not be com-

drainage hose and eliminate

 

pletely pumped off before

the bend if necessary, or

 

spinning because

clean the drain pump and, if

 

The drainage hose is bent or

required, remove foreign

 

The drain pump is blocked.

bodies from the pump hous-

 

 

ing.

The washing solution

Too much detergent was

Meter the detergent exactly

of the main wash

in accordance with the man-

probably used.

froths up a lot.

ufacturer's information.

 

 

 

 

32

Image 32
Contents ÖKO-LAVAMAT 70630 update Dear Customer Contents Installation and connection instructions Warranty conditions / Customer service centres Correct Use SafetyBefore Using for the First Time Child Safety General SafetyDisposal Environmental tipsDisposing of the Packaging Material Disposing of your old applianceDrawer for detergent and care agent Unit descriptionFront view Control panel Program SelectorWOOL/P Handwash Additional program buttons Program Selector Water Energy Time TemperatureRunning time display What does Update mean? Before the First WashPrepare washing cycle Sort washing and prepareWashing Types and Care Codes Water hardness details How much washing detergent and care agent?Water softener After the Washing Program Ends Run a Washing CycleBrief Instructions Setting the Washing Program TablesSet the delay timer/soaking duration Delay timerChange Spin Speed / Select Rinse Hold Soaking durationIndicator Door Indicator START/PAUSE Opening and Closing the Filling DoorAdd the washing For the maximum filling quantities, see the Program tablesSection Washing Detergents and Care Agents If using liquid detergent / tabletsAdd Washing Detergent/Care Agent Is pressed If the delay timer has been setStarting the washing program Completion of the Washing Program Program sequence displayMulti-display Change the Spin SpeedWashing cycle is finished/Remove the washing If the display Over Dosing lights up, too muchCare Codes Temperature Program TablesWashing Type of Washing MaxSeparate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Type of WashingCleaning and Care Detergent DrawerWashing Drum Main doorGency emptying Cleaning the drain pumpBefore cleaning the drain pump What to do if Remedying faultsProblem Possible Cause Remedy Water tap closed Open the water tap Water is not running Replace it if necessary Tor lights up green If the washing results are not satisfactory If there are still grey spots on the washingIf at the end of the last rinse foam is still visible If there are white remnants on the washingCarrying out emergency drainage When the water is completely drained Set additional rinse Cancel additional rinseAdditional rinsing cycle RINSE+ Child Safety Feature Cancelling the child safety featureCan be started On the inside of the filling doorInstallation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transportation protection Under unitsClose the hole with the cap G Inside of the unit against splash waterInstallation on vibrating floors Prepare the installation placeInstallation on a concrete base Ded foot as far as it will go Pensated for by adjusting the adjustable feetCompensate for floor unevenness Permissible water pressure Electrical connectionWater connection Water inflow Water drain-off inside a basin Tie the bend to the tap or the wall using a piece of stringWater drain Technical data DimensionsDimensions in mm Delivery heads over 1mFurther after-sales service agencies overseas Autres agences étrangères assurant le service après-venteWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCroatia New Zealand Bulgaria Kuwait/Arabian GulfCyprus Lebanon Oman Estonia Latavia PolandIsrael Malaysia Saudi Arabia Japan Singapore SloveniaThailand Slovakia Rep South Africa HungaryPage Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG