AEG 70630 manual Replace it if necessary

		Operating Instructions
Problem	Possible Cause	Remedy
	The screw connection on the	Tighten the intake hose
	intake hose is leaky.	screw connection.
	The drainage hose is leaky.	Check the drainage hose and
		replace it if necessary.
	The drain pump cover is not	Close cover correctly.
	correctly closed.
Water runs out under	Washing in caught in the	Abort program, remove
		washing from the filling
the washing machine.	filling door.
		door. Restart the program.
		Close the emergency drain-
		age hose correctly (see the
	The emergency drainage	section "Carry out emer-
	hose is not correctly closed	gency drainage"). Call Cus-
	or leaks.	tomer Service if the
		emergency drainage hose
		leaks.
Conditioner was not	The conditioner insert in the
washed in, compart-		Clean the detergent drawer,
	compartment for care agents
ment æ for care		attach the conditioner insert
	is not correctly attached or
agents is filled with		securely.
	is blocked.
water.
		Pay attention to the maxi-
Washing heavily	Too mush washing probably	mum filling quantity (see
		Program tables). In the case
creased.	put in.
		of easy-care textiles, select
		the program EASY IRON.
	Drainage hose bent.	Remove the bend.
	Maximum pumping height	Contact your customer serv-
		ice. For pumping heights
	(discharge height 1m from
Washing is not well		over lm he can offer you a
	the unit's standing surface) is
spun. Residual water is		conversion kit as a special
	exceeded.
still visible in the drum.		accessory.
Error code (2 is shown		Switch off the unit and pull
in the multi-display.
	Drain pump is blocked.	out the mains plug. Clean
		the drain pump.
	If a siphon is connected: Si-	Clean the siphon.
	phon blocked.

33