AEG 70630 manual Change Spin Speed / Select Rinse Hold, Set the delay timer/soaking duration

Operating Instructions

Change Spin Speed / Select Rinse Hold

0If necessary, change the spin speed for the final

spin / select RINSE HOLD:

Press the button Spin speed/RINSE HOLD as often as necessary until the indicator for the required spin speed (or of RINSE HOLD) lights up.

If RINSE HOLD is selected, the washing remains in the last rinsing water and is not spun.

3	If you do not change the spin speed, the final spin
	is automatically adapted depending on the washing program:
	– COTTONS/LINEN	1000 revolutions per minute
	– EASY-CARES/EASY IRON	1000 revolutions per minute
	– DELICATES	1000 revolutions per minute
	– WOOL/P (Handwash)	1000 revolutions per minute
	The speed of the intermediate spin depends on the selected program
	and cannot be changed.
Set the delay timer/soaking duration
	Delay timer
	The button DELAY TIMER enables you to delay the start of a washing
	program between 1 and max. 19 hours.
0	To do this, press the button DELAY TI-
	MER as often as necessary until the re-
	quired start delay is shown in the Multi-
	display, e.g. in the form 12h to delay
	the program start for 12 hours.
	If 19h is displayed and you press again,
	the run time of the washing program set appears display in minutes,
	e.g. 125). No delay timer can be set in this state.
	Soaking duration
	With the SOAKING button pressed, you can extend the soaking dura-
	tion with the button DELAY TIMER from 1 to max. 19 hours.
3	Without delay timer, the soaking duration is approx. 1 hour.

20